'04-'05 CBR1000RR
:
For Special Offers, follow us on
Twitter & Facebook: Click
>>
<< to become a Fan or Friend.
You could be one of our Lucky $30 HardRacing e-GIFT CARDS PRIZE WINNERS,
Each Week..
New Parts / Updated: 11-01-24
We update these pages often.
Be sure to hit REFRESH on your browser, each time you check this page.
Or it may Not Show the new parts.
GoPro HD HERO
3 $400Blow out sale
Price - $311 IN STOCK,
Very Limited Supply.
What's Available NOW..??????
CHECK YOUR BIKES SPECIAL PAGE OFTEN....... WE ARE ALWAYS
UPDATING AS SOON AS NEW PARTS BECOME AVAILABLE.
Call (704-799-2192) or E-Mail Us.
On April 4th, 2004 and we All picked up our
(5) CBR1000RR's . Anything
New, Anything Cool, and Anything that makes the bike Better, WE DID IT. And we
let you know how it goes. What works, and What Doesn't. Every
possible bits of info. we can provide, we will.
1) Dyno Jet PCIIIusb
First parts Installed PCIIIusb. This was a
Must. It's a little more difficult to install, since this bike is soo compact.
But, after about 20-30 mins. we got it. Mounts nice and
easy under the back seat. No need to velcro is in there.
This way when you want to plug in the USB Cable or the 9v PA to re-map
or Adjust the settings, you can just pull it out
from under the seat for easy access. The PCIIIusb Allows you to remap
the Fuel Injection as well as turn on Fuel pump
accelerator, to get rid of the Abrupt On/Off Throttle hickup.
-
2) HYPER WHITE XENON BULBS
Now that Honda went back to only 2 Bulbs, instead of the (3) that we are used to... extra
Wattage and Illumination on the Road is a Must Have. Not only are these Bulbs
brighter than stock, they have a Bluish/White Hue, similar to the New BMW & Mercedes
Lights. This makes for more definition on the road surface at night. They also
look very cool.
3) Vortex Rear Sets
All the guys at Our shop have Road Raced or do Currenty Road
Race. So, we all Must have Reverse Shifting (GP Shift).
Once you have Tried Reverse Shifting, you will never want to go
back to standard Again.
Well, the Great guys at Vortex have an Awesome Rear Set Kit that does
BOTH Standard and Reverse Shift.
This Kit is Fully Adjustable and Multi Piece Design.
Meaning, if you brake something, you don't have to buy a
whole new Kit. Notice the Very Trick Cam on the Linkage Allowing the
rider to swap between Std. and Revere Shift.
ON SALE....... -IN STOCK
4) Dyno Jet Quick Shifter
Allows the Rider to shift the Bike At FULL Throttle and NO Clutch,
without damage to the Transmission.
At the exact time the Rider Starts to shift the Bike, the Quick shifter
detects the movement, and cuts the Fuel,
For a Split Second allow the Transmission to unload as the rider completes
the shift.
A MUST for Racers or Hard Core Street Riders, who want to shave every second
off their times.
Works great for Stunt Riders as well, who don't want to worry about the clutch on
the upshifts.
Plugs directly into the PCIIIusb Aux. port. Includes CD to set kill
time, and Min RPM's. preset by the Rider.
Requires (2) Dyno Jet Shifter Rods to complete the install. IN STOCK
Very Easy to install. Takes approx. 5 min. .
5) Galfer Stainless Steel Brake Lines
These are a no brainer. The Stock brakes are great. But, with SS
Lines installed they are off the chart.
When you squeeze your brake lever a large part of the force goes into the Rubber
lines, and expands them.
This takes away the Total pressure applied to you Caliper Pistons. Thus, you
lose stopping Power.
With Stainless Steel Braided Lines, nearly ALL the force goes into the Calipers.
Giving you the most stopping power. Put it this way. It can mean the
difference between running into the back of the car that just pulled out in front of
you OR Stopping 10 Feet
Short.
These are A Must Have for us. - Starting @ $59 and Up
IN STOCK
6) Fender Eliminator
Kit We couldn't stand all that ugly plastic hanging down from
that Beautiful Tail Section. So, it had to go.
In place is this very Trick Fender Eliminator Kit. Yea, it's a little
pricey. But, very well worth the money, when you see
The end result. 2 Kits available One for use with Stock Exhaust. And
the other to use with "Aftermaket" Exhaust. "STREET" 1H1001s - $179.95
$164.95 (Kit Retains STOCK Tag Light. DOES,
Include Heat Shield Plates to Retain Stock Bronze Exhaust Cover. As shown in
Picture Above.)
(Signal style may vary Slightly)IN STOCK
"RACE" 1H1001r - $159.95
$145.95 (For use with "Aftermarket
Race Exhaust"
Where Stock Bronze Exhaust Cover will Not Fit. Kit Does
NOT include additional Heat
Shield Plates to Retain Stock Bronze Exhaust Cover. DOES, Retains STOCK Tag Light.
) (Signal style may
vary Slightly)IN STOCK
7) MICRON SERPENTS
The Stock HP is more than enough for some riders. But, Not for
us. So, we had to change the Exhaust.
Micron Serpents were outstanding on our CBR929/954's. They Lost NO HP
Anywhere, and had
HugeGains Everywhere. So, we are figuring on similar gains with our
CBR1000RR's. Interesting to Note: Honda has Designed
their Exhaust Ports on the CBR1000RR in the same
Configuration as the Serpent Headers, Using the Oval style Shape. What makes the Serpents
so
awesome is the Hydra Forming Process. Take a look
at the close-ups. Micron is able to make
tappered headers, out of ONE Piece.. Not having to piece many different diameter
pipes together and weld
them up. Notice No Welds on the Headpipes. Welds, add weight and Greatly
reduce flow... causing loss of of power. Plus, with the Hydra Forming they can
make just about any shape and design header They want, to get the Most HP
Possible.
Great news. The Micron Serpents Come with a Bungle already on the system. So,
if you purchase a Wide Band
Commander, you don't need To weld anything. You just simply Screw in the Wide Band
02 Sensor right into the exhaust. Very Sweet.
Stock Honda CBR1000RR Exhaust System - 23.8 Lbs
Micron Serpents w/ Ti Canister - 12.5 lbs
That's OVER 11 lbs Weight savings, just by installing the Micron Serpents.
Horse Power Numbers are what we hoped for. Stock
149.5 Serpents - 163.7 Over 14 hp GAINS.
This Bike Only had 300 Miles on when Dyno'd. As the Motor Breaks in, we are
hoping for another 4 - 5 hp. Available NOW - IN STOCK. Serpents w/ Titanium Micron Serpent
System
It's finally done. Check out our:
>> Complete Write-Up on Removing the
Stock Exhaust and Installing The Serpents <<
8) OHLINS SHOCK Our CBR1000RR Ohlins Order
just showed up.
Once you have ridden a bike with an Ohlins Shock you will never want to ride
with a Stock Shock Again.
It's hard to explain how much better an Ohlins is over Stock. Not until
you actually try it will you understand.
But, one customer explained it best. You get the Ride of a Cadillac,
and the
Handling of a Porsche. All in the Same
Package. The best of both worlds. Check out the Sweet Mtn. for the
Remote Hydraulic Spring Pre-Load.
This allows you to adjust the spring compression with the simple turn of the knob.
No more Spanner wrenches & Busted
knuckels. High/Low Speed Compression, Ride Height, Rebound Adj. and Remote
Spring Pre-load. The Works.
- >>
Ohlins
Shock << IN STOCK
9) DYNO JET - WIDE BAND COMMANDER - Dyno's Work Great to get a Good Base Map in your Power
Commander. But, they don't take into effect RAM AIR. Plus, they are very
expensive. These Days, they can be as much as $300 - $400. For about the same
price, you can Purchase a Wide Band Commander, and do it yourself.
So, you know it's done right. And go back and make changes if neccessary.
Since we want to get the Absolute Most HP out of our Bikes, we are going to install
the Wide Band Commander which Will allow us to get the perfect map for our Bikes. These
are very trick
A/F monitors that use a Bosche Wide Band O2 Sensor to measure REAL Time, accurate
A/F measurements On the Road. It's stores the information, so when you get back
to Your house, you can download the information to your computer and adjust your
PCIIIusb map accordingly. Best of all the Serpents for the
CBR1000RR already have a Bungle welded on the System for the Wideband Sensor. So,
you don't have to do anything, except screw it in. No Welding required. Very
Sweet.
There are many other things the WBC's Do. Too much to list. For More Info.
Click >> Wide Band Commander
<<
10) TARGA SEAT COWL -
FOR THAT SWEET RACE LOOK. SIMPLY REMOVE YOUR STOCK SEAT
AND REPLACE WITH SEAT COWL. OEM FIT, USING
STOCK KEY LATCH. WORKS JUST LIKE SEAT.
PERFECT FACTORY PAINT COLOR MATCH. (Red /
Silver / Black) Targa Seat Cowls -
$183
Includes Option Seat Pad and ALL Mtn. Brackets. So,
you can swtch back and forth with your seat.
11) Zero Gravity Dble Bubble Dark
Smoke -Available NOW - Increases the Airflow up and over the Riders Head. Cuts down glare on
Guages. Looks great. Zero-Gravity Double Bubble Drk Smoke Windscreen
12) CLEAR LED TAIL LIGHTS w/ INT. LED TURN
SIGNALS- IN STOCK
Clear LED Tail Lights w/ Optional Integrated LED Signals
>> Clear
Tail Lights & LED's <<
(CTL-0062) Only - $99.95 IN
STOCK
Unlike our Competitors, who sell Just a Circuit Board,
and require you to tear appart your entire Tail Light.....
We sell only the COMPLETETail Light Housing.
Just pop out your stock Tail Light, and Insert this one. OEM Plug for Tail Light. NOTE: (TAIL Light come with Turn signal
option.
You don't Have to use them, if you don't want to. But, they are included in
the price.)
SEQUENTIAL
TAILLIGHTS
13) WAVE ROTORS -
While the Stock rotors are already super lite, these Wave Rotors save another 1/2lb per
Front Rotor. In the Rear They knock off Nearly a full pound. Because of the
wave design they also disapate heat better then the stock rotors causing less Brake Fade.
And of course Major Eye Candy and Head turning looks.
GALFER Wave Rotors($129
up )
13a) Marvic Magnesium Rims
- Too much info. to List. Please see Special
Marvic Page and Weight Reduction Page : >> MARVIC << From -
$1887 up
14) OHLINS FORKS -
IN STOCK
Our CBR1000RR Ohlins Forks Order just showed up.
Once you have ridden a bike with an Ohlins Forks ou will never want to ride with a
Stock Forks Again It's hard to explain how much better an Ohlins is over
Stock. Not
until you actually try it will you understand. But, one customer explained it
best. You
get the Ride of a Cadillac, and the Handling of a Porsche. All in the Same
Package.
It's the best of both worlds.
Greatest Thing about the Ohlins Forks, is Everyone wants them.
It's like having a Rolex Watch.
So, if down the road, you ever decide to trade your bike, you can Easily Sell
these For $1500 - $1700 Depending on the Condtion.
So, all in all you will only have spent about - $300 - $500 for a set of Ohlins
Forks. You Can't beat that. >>
Ohlins
FORKS <<
15) K&N AIR FILTER CHARGER
RETAIL - $101.95 (HA1004)
ON SALE -$89.95 VERY
Ltd. Qty. IN STOCK
16) STM Slipper Clutch STM Slipper ClutchesIN STOCK
Slipper Clutches are now becoming Standard equipment
on more and more
NEW Sport Bikes such as (05-06 GSX-R1000 / 04-06 ZX-10R / 03-06
ZX636/6RR, 06 R6).
Now, STM Has released a Model for nearly ALL Popular Models
STM Slipper Clutches are an excellent Upgrade to High Performance Sport
Bikes.
17) Dyno Jet Ignition Module <-click
CBR1000RR Dyno Map, showing nearly 4 HP Gain, everywhere, With JUST the Ign.
Module changes.
Some bike have shown gains over 8 hp, in certain areas, by simply changing the
Ignition Timing.
See Below for More Details.
Run ALL NEW Drag Race
Simulator for Dyno Jet LCD Screen
-
-DYNO JET
LCD DISPLAY
-
- DYNO JET Mult-Function
Hub -
Want To SEE What your bike, and Power
Commander are Doing WITHOUT A COMPUTER.
Do you Want to Switch MAPS on the Fly, or see what gear you are in, or See what
your fuel load is?
Do you want to tweak your map away from your house. Then you want a Dyno
Jet LCD Display.
UNIT
Plugs Directly into Your Power Commander IIIusb. Allows you to
View Maps, Current Speed, Gear Position, RPM, TPS and Much More
Can also Mtn. ON BIKE, in place of Gauges
(On some Bikes)
Click here for More Details
>> LCD DISPLAY
<<
LTD. QTY. IN STOCK
20) Starlane GPS Lap
Timer w/
Speedometer and RPM Pickup
>> Starlane GPS Lap Timers
<< GPS (Satellite) Technology.
NO Transponder Need. Imagine, No More worrying about setup .Transponders on the
side of the track each time you go out, or
Each time you come in. Those days are done.
Just go out on the track, Set the Start/Finish Line and the GPS (Satellites) Does it all for you. Current Speed, Lap Times, RPM;s, Max Speed, Fastest lap.....and
much more.
You can even Save each track, in memory. NO Wire Splicing, or
taping necessary.
This Unit
Easily transfers from bike to bike. Or you can put it in your car, or
truck, or SUV.
Very handy device.
TYPE R - With TRACK MAPPING. Downloaded to your
PC or Laptop
21) Starlane DIGITAL GEAR
INDICATOR w/ Integrated Shift Light
Starlane Digital Gear Indicator
w/ Integrated Shift Light
22) Brembo RCS16 Clutch Brembo RCS16 CLUTCH Mastercylinder w/ FOLDING Lever The revolutionary aspect of the Brembo RCS19 Brake Mastercylinder is now in
a CLUTCH VERSION.... allowing the ability to choose between the 16x18 and 16x20
configuration
RCS16
Sale Price:
$290 (Order this Brembo MC on-line, and receive Free EXPRESS
Shipping )
This is Just a Small List of the parts that are available NOW, or Due to Release Any
Day.
We have many others as well. Just call (704-799-2192) or E-Mail Us.
AVAILABLE NOW
The All New PCIIIusb , PCV's & Dyno Jet Quick
Shifters:
Featuring: State of the Art Technology
New Mapping methods, USB Port For Easier & Faster
Transfer and Auxiliary Data Port for Future Add-ons.
Get One Now, Before they are all on Back Order.
PC6
ON SALE - $418.99
Auto Tune for Power Commander V
“Auto Tune” kits are available that include Wide Band O2 sensors and
control boxes. It will plug directly into the PCV and allow automatic fuel
adjustments. Auto Tune can make a map for each gear it can map each
cylinder separately for each gear if needed. (basic settings would make one
map for all gears) “Warm Up” fuel adjustment (unit reads engine temp
and allows fuel/timing adjustments based on it) Each map cell is
individually adjustable so you can specify an exact AFR value for each area
if needed. This allows the tuner/user to select specific AFR targets for
idle, cruise, and large throttle opening areas. By doing this you can
automatically tune the cruise area for best fuel economy while at the same
time achieve maximum power at wide open throttle.
If Dyno Jet does not have the exact map for your combination of parts you
simply need to choose the closest one and let the Auto Tune kit do the rest.
(if you have an very heavily modified engine and/or short drag pipes
verifying your settings on a dynamometer is recommended).
SPORT BIKE AUTO TUNE KITS
Retail : $250
OUR SALE PRICE - $347.99
Dyno Jet Secondary Fuel Module >>
SFM << ON SALE - $289.99 Allows PCV to control ALL 8 Injectors
The Dynojet Quick Shifter Sensors are compatible with USB Power
Commander ONLY and allow "full throttle, clutch-
less" upshifts. These high quality sensors provide fast, accurate and
reliable shifting in conjunction with the Power Commander. Sensors are
attached to the gear linkage and connect into the Power Commander expansion
port. All sensors include a Software utility which allows the user to adjust
the "Kill Time" and "Minimum RPM Shift Point" within the Power Commander
Control Center Software. "Please note these are
NOT Power Shifters. They do
NOT shift for you. They
allow "full throttle, clutch- less" upshifts, by cutting the Fuel
or Spark for a split second as you start to shift
with your foot..
Dyno Jet Quick Shifters:
ON SALE -
$270.99 (IN
STOCK)
Buy It Now
>>
DynoJet
Quick Shifters <<Requires Ignition Modules
For more information,
please refer to the guide belo: Linkage Adapters ONLY Sold w/ Quick Shifters.(Not sold Separately)
Linear Sensors are universal..
Shift Rod Sensors require the gear linkage tie-rod to be modified. We are developing a
range of tie-rods for the popular models, as well as universal tie-rods that are
specifically designed to give maximum adjustment, allowing a combination of different M6
right hand and left hand male and female threads over a wide range of 160mm to 280mm. This
will allow easy installation on many models as well as some custom rear-set applications..
<-click
CBR1000RR Dyno Map, showing nearly 4 HP Gain, everywhere, With JUST the Ign.
Module changes.
Some bike have shown gains over 8 hp, in certain areas, by simply changing
the Ignition Timing.
Power Commander Ignition Module
An “Add-On”
Power Commander Ignition Module
for Power Commander USB’s,
are available NOW. These modules will plug directly into the PCIIIUSB’s expansion port and the
bike’s ignition coils. Dynojet Ignition Modules use the latest in “direct coil driver technology.” Both advancing and
retarding of the ignition timing at specific throttle postion and rpm combination will be
possible. In “Advanced Mode,” the tuner will be able to set the timing for each
cylinder individually.
When tuned correctly, the Ignition module has potential to make excellent HP
Gains Through out the RPM Range. The Ignition Module will Also
allow the User to increase his Rev. Limiter of the Bike, Enabling them to
Tap the Most power
possible from the engine.
(Note, this does require a signed waiver form) The Power Commander Ignition
Module will be
available for popular sport bike models.
This does not apply to Harley Davidson model Power Commander USB’s, as they include
ignition timing adjustment ability as part of the base unit..
The Dynojet Ignition Module is an “add on” accessory for
select Power Commander III USB. It allows you to control and adjust the
ignition timing of your motorcycles’ engine.
The Dynojet Ignition Module is connected to the PCIII USB with it’s built in
expansion port link and communicates via a CAN interface. As in the case of
the Power Commander, the Dynojet Ignition Module uses OEM style connectors
to plug in-line of the stock ignition harness so no cutting or splicing is
required.
The Dynojet Ignition Module uses “direct coil driver technology” and allows
a high degree of timing adjustment. In the Power commander Control Center
Software the user is able to advance or retard the ignition curve up to 10
degrees based on throttle position and RPM. It is also possible to alter the
timing for each cylinder individually if necessary.
The Ignition Module comes standard
with no adjustments made in the map for the timing table. Due to different
states of tune, fuel quality, and engine modifications we found it is best
to leave the ignition timing stock for safety reasons.
On motorcycles that have eight injectors and were not previously able to
benefit from the use of the Dynojet Quick Shifter, the Ignition Module now
allows this functionality. The Dynojet Quick Shifter is connected to the
expansion port between the Ignition Module and the PCIIIusb. Regular Price - $400ON SALE - $377.99 Buy it Now >>
DynoJet
Ignition Modules <<
GoPro HD HERO
3 $400Blow out sale
Price - $311 IN STOCK,
Very Limited Supply.
ALL NEW HARD RACING.com
T-SHIRTS
Dyno Jet, Brembo, Yoshimura Logo on one sleeve
And
Akrapovic, Alpinestars, Ohlins Logo on the other sleeve.
04-05 CBR1000RR
"Moto GP Style" FULL Titanium System w/ Dual Titanium Cans.
>> Ti-Force
<<
DISTRIBUTOR INVENTORY REDUCTION
SUPER BLOW OUT SALE
As much as 50% off
Watch Video>>
<< Brembo RCS19 Brake Mastercylinder w/ FOLDING Lever (RCS 19)
The revolutionary aspect of the Brembo RCS19 Brake Mastercylinder is the ability
to choose between the 19x18 and 19x20 configuration. If you have read about Brembo Master Cylinders, you will know what these numbers mean and that there is a trade-off
between the two pivot configurations. Not to say that either configuration is
bad, but the rider had to choose between varying degrees of feel and power. Now
the rider can change the configuration to suit their needs. No more
compromises!
Another unique aspect to the RCS19 is itcomes
with a microswitch for the brake.
For racers, the adjuster knob has been relocated to the same position as the
19x18 Billet Folding Brake Master Cylinder that is used by Valentino Rossi and
Nicky Hayden in MotoGP and WorldSuperBike. Two springs have been installed to
ensure constant contact between the lever and the pushrod to ensure a longer
lifespan.
The Brembo 19RCS brake master cylinder retains features that made Brembo the top brake
system manufacturer today including forged CNC-machined construction and a
folding lever that reduces crash damage. RCS19
Sale Price:
$290 (Order this Brembo RCS on-line,
and receive FREE EXPRESS Shipping) IN STOCK
BREMBO "CORSA CORTA
RR" RCS19
Brake Mastercylinder
Sale Price:
$695 (Order this Brembo RCS on-line,
and receive FREE EXPRESS Shipping
)
>>
BRAKING RADIAL Mastercylinders << ON SALE - Starting at only - $249
Includes Brake Reservoir, Hose, Bracket, Clamps, and Brake Light
Switch and much more.
Click link above for Details
BREMBO REAR
HP CALIPER
Following the latest development in
Brembo’s high performance kits programme, which broadly extends the
product range still further, motorbike enthusiasts are now offered a
rear caliper and bracket kit interchangeable with the
majority of OE assemblies fitted to Japanese and European supersport
models. Machined entirely from billet, the caliper body is the outcome
of exhaustive FEM calculations that optimize weight and stiffness. The
caliper is supplied complete with sintered pads —
currently the top option available on the market. Special care has been
taken over the need to achieve optimum control of the braking
action, even in conditions of poor grip that could be caused by
reduction of rear wheel weight during the braking action. The kit is
compatible both with OE brake master cylinders and with OE discs fitted
to all main supersport bikes.
In the case of Japanese supersport bikes
(SUZUKI, YAMAHA, HONDA and KAWASAKI), the kit includes
an adapter bracket that drops the caliper below the rear axle — its
usual position on racing machines. This helps to lower the centre of
gravity of bike and rider.
Available for these Models ONLY
: '08-'09 CBR1000RR
'07-'08 GSX-R1000 / '08-'09 ZX-10 /
'06-'07 ZX-10 / '04-'05 ZX-10
'07-'08 R1 / '04-'06 R1
HP " BILLET"
REAR
Caliper
Retail - $850.95
Price Includes Brembo PADS.
Sale Price Starting at $482.25 - <
BREMBO PRICING >
Brembo RCS16 CLUTCH Mastercylinder w/ FOLDING Lever The revolutionary aspect of the Brembo RCS19 Brake Mastercylinder is now in
a CLUTCH VERSION.... allowing the ability to choose between the 16x18 and 16x20
configuration
RCS16
Sale Price:
$290 (Order this Brembo MC on-line, and receive Free EXPRESS
Shipping )
Brembo RCS16 "Corsa Corta " Radial Clutch
Mastercylinder The revolutionary aspect of the Brembo RCS19 Brake Mastercylinder is now in
a CLUTCH VERSION...
RCS16
Sale Price:
$372 (Order this Brembo MC on-line, and receive Free EXPRESS
Shipping )
Brembo RCS16 "ALL NEW" Corsa Corta RR Radial Clutch
Mastercylinder The revolutionary aspect of the Brembo RCS19 Brake Mastercylinder is now in
a CLUTCH VERSION.... allowing the ability to choose between the 16x16 or 16x18 configuration
RCS16
Sale Price:
$695 (Order this Brembo MC on-line, and receive Free EXPRESS
Shipping )
ALL NEW
Brembo "HP" BILLET Brake Calipers
(2 Piece Design) 4
Piston, 2 Pad Setup.
Designed very similar to
the "Racing" Monobloc Calipers.
But, at LESS then half the Cost.
EXCELLENT Upgrade and OEM Fit.
108mm Bolt-Hole Setup
for Most Japanese Sport Bikes, That have Radial Calipers Stock.
Brembo has developed a new caliper with radial attachments that is
interchangeable on the standard radial forks of maxisport class Japanese
machines (HONDA, YAMAHA, SUZUKI, KAWASAKI). With a caliper body machined
from solid metal, special attention was paid to achieving high braking power
and stiffness, utilizing technology derived
directly from race engineering. The product, which is supplied in kit form,
is equipped with sintered brake pads - at the cutting edge of today's
manufacturing technology; the kit also contains an instruction handbook, a
set of Brembo decals, and a series of practical temperature stickers as used
in race conditions to monitor the working temperature of the calipers. The
stickers clearly identify the thoroughbred race pedigree of the brakes.
To assure that we send you the correct spacers, please let us know the make,
model and year of the bike that you plan on putting these calipers on.
Retail - $1718
Sale Price $1399 <
BREMBO PRICING >
Price Includes Brembo PADS.
Brembo HP
floating rotors were developed specifically to provide owners of
Japanese Sportbikes (HONDA, YAMAHA, SUZUKI, KAWASAKI) with the
maximum performance levels on the street and on the track. The
new rotors are available in three diameters and are of greater
thickness than standard rotors. The braking surface features a
series of drilled holes to maximize performance and control when
braking while simultaneously reducing rotating mass with
consequent advantages in terms of machine handling. The braking
surface is connected to the carrier, which is machined from
solid aluminum and is the product of a comprehensive FEM
calculation procedure. The connection is achieved by means of
ten floating- type aluminum buttons, reflecting a strictly race
style engineering project. The kit contains the two rotors, and
a set of Brembo decals.
Retail - $769.95 - $880.95 Starting -
$284.50/each Disc >>
BREMBO PRICING <<
Brembo ZO4 Upgraded Pads for OEM Calipers
Sale Price $123-$231 >>
BREMBO <<
The newest offering from the Brembo HP line. The M4 CAST Monobloc Caliper.
Designed with an entry level cost in mind... Using
CAST Alum.
Instead of Billet.
These calipers are of monoblock construction utilizing a unique gravity cast
procedure.
High temperature main seals plus dust seals allow for use on street or on
the track.
Caliper CAST ALUM. bodies are then CNC machined.
Brake pads made from sintered material so & are ideal for use in wet and dry
conditions.
Kit includes instruction manual with all information about fitting,
bleeding, maintenance and more. 108mm
M4 Cast Alum. Calipers
Retail - $1098(Except 07-08 R1)
Price Includes Brembo PADS.
Sale Price - $699/set
of 2 Calipers
To See More Information on BREMBO CALIPERS, ROTORS and MASTERCYLINDERS
>> BREMBO<<
TruGel Batteries The Ultimate LONG Lasting Top Quality
Motorcycle Battery. PERIOD.
And Best of All, They are LESS Cost then traditional Lead/acid batteries
BREMBO RSC Yamaha Replacement Cable Clutch Lever Mechanical clutch lever assembly machined entirely from billet.
Lever boss has special geometry. Plug-and-play design ensures the lever can
mount directly to the original arm lever assembly. Similar in all respects to
the 19RCS Master Cylinder with laser-imprinted Brembo® Racing logo and the
famous tri-color flag on the lever boss.
Perfect Match for your RCS19 Brake RSC Yamaha Cable Clutch Lever
Sale Price:
$149.90 Fits These Model Bikes ONLY: '02-'10 R1, & '99-'10 R6
JRI Shocks and Cartridge Kits
Shocks Starting at - $874
Shock and Cartridge Kit Combos Starting - $2195
>> JRI <<
RACE TECH FORK SPRINGS - for OEM Forks
Race Tech manufactures precision high performance springs that have
a high stiffness to mass ration.
In other words; Race Tech Fork springs are lightweight for the their
partifuclar rate.
This requires the finest materials and processing.
Race Tech OEM Replacement Fork Springs - $119
RACE TECH SHOCK SPRINGS - for OEM Shock
Race Tech HP Springs have a high
stiffness-to-mass ratio. In other words; our springs are light weight
for their particular spring rate. This requires the finest materials and
processing. Shot-peened and pre-set so they cannot sack out. All Race
Tech HP Springs have the highest rate tolerences in the industry. These
are the finest springs in the world-guaranteed.
Race Tech OEM Replacement Shock Springs - $105
Race Techs original bolt-on fork valving system
for cartridge forks
Triples the flow area by putting valving control on the shim stack
instead of the overly restricted stock piston
Outstanding tunability, improved control, traction, plushness and
bottoming resistance
Includes complete instructions, Gold Valve pistons, valving charts, and
valving shims
Race Tech 20mm Gold Valve Fork Kit
for OEM FORKS - $149
BST Carbon Fiber Wheels, are OVER 10 lbs LIGHTER
then stock wheels
This translates to SAVING over 4000lbs of inertia at 100mph
Your bike will handle better, accelerate faster, brake sooner, and better
turn-in.
The SENA 50R, 50S, 30K,20S, 10S, 10C Headsets are a State-of-the-art Motorcycle & Powersports Bluetooth®
communication system.
The unit provides a sleek and aerodynamic design that offers a versatile jog
dial that maximizes
the ease of use for riders.
Great Range, excellent sound quality.
- Long Lasting Battery life
- Listen to your music
- Answer or make Phone calls
- Water Resistant
- Easy to setup and use right out of the box >>
SENA
Communication System <<
- BOTH headlights on as Low Beam
- For HIGH Beam the bulbs move upwards creating a higher, longer casting
beam of light
- Complete Plug-n-Play Kit
- Choose from 6000K, 8000K, 10000K, or 12000K color temperature
Real time fuel adjustments
Display channels real-time: RPM, TP,
map position (when using map
switch), duty cycle,
fuel change,
ignition change & wideband air/fuel
ratio- (w/WB2 or AutoTune connected)
Weather resistant for use in all
conditions
Log channels saved to internal
memory and can be viewed / analyzed
with Dynojet’s PowerCore Software
High contrast display, viewable in
direct sunlight
Dyno Jet POD-300 Display (for
use with PCV only)
Retail - $350 OUR Sale Price - $298.99
IN STOCK
Don't take chances with a Flat, or leaking Tire which can
cause a crash or accident on your bike.
This system is very Easy to install. Takes only about 3-5 min.
installation
Completely Wireless.
>> Tire Pressure
Monitoring System (TMPS) <<
- BOTH headlights on as Low Beam
- For HIGH Beam the bulbs move upwards creating a higher, longer casting
beam of light
- Complete Plug-n-Play Kit
- Choose from 6000K, 8000K, 10000K, or 12000K color temperature
PIG Spotter Mirrors w/ LED Turn Signals These are the Ultimate Mirrors made from Billet Aluminum with
Convex Lens Offered in: Black / Polished / Chrome
> PIG Spotters <
Clear LED Tail Lights
w/ Optional Integrated LED Signals
(CTL-0062) Only - $99.95IN
STOCK >> Clear
Tail Lights & LED's <<
Unlike our Competitors, who sell Just a Circuit Board,
and require you to tear appart your entire Tail Light.....
We sell only the COMPLETETail Light Housing.
Just pop out your stock Tail Light, and Insert this one. OEM Plug for Tail Light. NOTE: (TAIL Light come with Turn signal
option.
You don't Have to use them, if you don't want to. But, they are included in
the price.)
>>
Motion Pro Revolver
3 Throttle Kit << The best way to improve throttle control, but throttle sensitivity
can be changed mechanically to suit riding conditions and rider preferences
to great advantage no matter what your level of skill.
__________________________DISPLAY
and TIMERS_______________________________
Real time fuel adjustments
Display channels real-time: RPM, TP,
map position (when using map
switch), duty cycle,
fuel change,
ignition change & wideband air/fuel
ratio- (w/WB2 or AutoTune connected)
Weather resistant for use in all
conditions
Log channels saved to internal
memory and can be viewed / analyzed
with Dynojet’s PowerCore Software
High contrast display, viewable in
direct sunlight
Dyno Jet POD-300 Display (for
use with PCV only)
Retail - $350 OUR Sale Price - $298.99
IN STOCK
Starlane Digital Gear Indicator
w/ Integrated Shift Light
Starlane GPS Lap Timer
w/
Speedometer and RPM Pickup
>> Starlane GPS Lap Timers
<< GPS (Satellite) Technology.
NO Transponder Need. Imagine, No More worrying about setup .Transponders on the
side of the track each time you go out, or
Each time you come in. Those days are done.
Just go out on the track, Set the Start/Finish Line and the GPS (Satellites) Does it all for you. Current Speed, Lap Times, RPM;s, Max Speed, Fastest lap.....and
much more.
You can even Save each track, in memory. NO Wire Splicing, or
taping necessary.
This Unit
Easily transfers from bike to bike. Or you can put it in your car, or
truck, or SUV.
Very handy device.
TYPE R - With TRACK MAPPING. Downloaded to your
PC or Laptop
STM Slipper ClutchesIN STOCK
Slipper Clutches are now becoming Standard equipment
on more and more
NEW Sport Bikes such as (05-06 GSX-R1000 / 04-06 ZX-10R / 03-06
ZX636/6RR, 06 R6).
Now, STM Has released a Model for nearly ALL Popular Models
STM Slipper Clutches are an excellent Upgrade to High Performance Sport
Bikes.
& Facebook: Click
>>
<< to become a Fan or Friend. 
$164.95 (Kit Retains STOCK Tag Light. 
The Stock HP is more than enough for some riders. But, Not for
us. So, we had to change the Exhaust.
Our CBR1000RR Ohlins Order
just showed up. 
Dyno's Work Great to get a Good Base Map in your Power
Commander. But, they don't take into effect RAM AIR. Plus, they are very
expensive. These Days, they can be as much as $300 - $400. For about the same
price, you can Purchase a Wide Band Commander, and do it yourself.
So, you know it's done right. And go back and make changes if neccessary. 
Increases the Airflow up and over the Riders Head. Cuts down glare on
Guages. Looks great.
<-click
- DYNO JET Mult-Function
Hub -
Watch Video>>
