What can I do with the Dyno Jet LCD Screen...?


     
Run ALL NEW Drag Race Simulator for Dyno Jet LCD Screen (only offered on LCD-100 model)

Adjust your quick Shifter settings.


Change your Maps, and view them .


View your Wideband Commander Files.


View and Adjust your  Power Commander Settings including Fuel Trim.

 

The Dyno Jet LCD Display connects to any Power Commander via a "quick disconnect" cable.
It is designed to remain on the bike and is weatherproof.
While connected, the unit will display all available data from the Power Commander.
When the optional Multi-Function hub is also installed all of its data is available for viewing as well.

Multiple maps can be stored in the on board memory.
These maps can be sent to the Power Commander "on the fly".
Additionally, maps can be adjusted using the controls on the display.

The LCD Display has the ability to log the data being displayed for later analysis.

YOU Can ALSO, tap into your  WIDEBAND COMMANDER, and view REAL TIME Air/Fuel Ratios. (Must have Multi-Function HUB-003)

There is a SD Memory card slot (SD Card sold separately) so that the amount of data storage for maps and logging can be increased at any time.

Easy  Unit  Dismount
The unit can be removed easily from the bike and programmed with desktop computer.

Maps can be loaded, stored and the data viewed with the supplied software. As new functions, screen and features become available the unit is "user upgradable" using the supplied USB cable and free downloads on the website.





Dyno Jet LCD Display
Product Features
Display all Power Commander data "real time"
Allows storage & switching between multiple maps
Data logging capable
"On Screen" map adjustments
User configurable screens
USB programmable & upgradable
Active matrix TFT LCD 240 X 320 16bit color screen (Requires Windows 2000, ME or XP)

User Friendly Adjustment Control Buttons & "Joystick"


YOU Can ALSO, tap into your WIDEBAND COMMANDER, and view REAL TIME Air/Fuel Ratios. (Must have Wideband replacement harness p.n. 76950025 )

Dyno Jet LCD Display - LCD-100 (for use with PCIIIusb only) Retail - $300  
OUR Sale Price - $269.95    DISCONTINUED

Dyno Jet LCD Display - LCD-200 (for use with PCV only) Retail - $300  
OUR Sale Price -     DISCONTINUED


 

The Dynojet MULTI-FUNCTION Hub Accessory for PCIIIusb.
The Multi Function Hub allows user to access advanced expansion features.
Several optional harnesses are available to permit both input and output to/from the module.

Note: The complete Hub Kit is shown on the images below
 
COMPLETE KIT Dyno Jet Multi Function Hub w/ map switch and handle bar bracket, gear position/speed, pressure input and relay harnesses
HUB-003  Retail - $229    OUR Sale Price - $179.95



 



Dyno Jet Multi Function Hub w/ map switch and handle bar bracket 
HUB-002  Retail - $189   OUR Sale Price - $159.95




 

 What is the Map Selection Switch
Connecting the map selection switch allows the rider to switch between two different maps within the Power Commander. For Touring Bikes this could be used to switch between a "fuel economy map" for long rides and a "full performance map."

For sport bikes it could be used for applications such as "dry nitrous oxide" kits to permit the user to make the fuel mixture richer when activating the system. Additionally, if the Power Commander has an ignition module connected it can switch to a less aggressive timing map at the same time.


What is the Gear Position/Speed Input
Fuel and ignition timing (when using the Dynojet Ignition Module) adjustments can be made based on gear position or speed. If the user wants to advance the timing in lower gears while retarding it in higher gears this input makes that possible.
 

WANT TO LEARN MORE ABOUT THE MULTI FUNCTION HUB and Accessories

 >> MULTI-FUNCTION HUB MANUAL  <<


 

Pull Type