DynoJet PowerCommander II / III / IIIusb / IIIr / V
DynoJet Quick Shifters & Ignition Module
& Auto Tune
PC V showing with OPTIONAL accessories.
We will NOT be Undersold.....
WE GUARANTEE IT.
We WILL Beat It ANYONE ELSE's Advertised
"IN-STOCK" Power Commanders
In most cases each bike only has ONE type of Power Commander available for it. All you
have to do is look at the application chart listed below. It clearly shows the
power commander Models Available for your bike.
At this time Dyno Jet ONLY Makes those specific Power
Commanders listed for that particular bike.... and No Other.
Dyno Jet PCIIIusb & PC V Add-Ons
Quick Shifters & Ignition Modules & Auto Tune
Auto Tune for Power Commander V
“Auto Tune” kits are available that include Wide Band O2 sensors and
control boxes. It will plug directly into the PCV and allow automatic
Auto Tune can make a map for each gear it can map each cylinder
separately for each gear if needed. (basic settings would make one map
for all gears)
“Warm Up” fuel adjustment (unit reads engine temp and allows fuel/timing
adjustments based on it)
Each map cell is individually adjustable so you can specify an exact AFR
value for each area if needed. This allows the tuner/user to select
specific AFR targets for idle, cruise, and large throttle opening areas.
By doing this you can automatically tune the cruise area for best fuel
economy while at the same time achieve maximum power at wide open
If Dyno Jet does not have the exact map for your combination of parts you simply
need to choose the closest one and let the Auto Tune kit do the rest.
(if you have an very heavily modified engine and/or short drag pipes
verifying your settings on a dynamometer is recommended).
AUTO TUNE KITSSTARTING
Click for more details >>
These Accessories are for PCIIIusb models
ONLY!! They will NOT
WORK with Other Models.
Power Commander Ignition Module
Now Available for
Power Commander Ignition Module
ARE available for Power Commander USB
& PC V s. These modules will plug directly into the PC's expansion port and the
bikes ignition coils. Dynojet Ignition Modules use the latest in direct coil driver technology. Both advancing and
retarding of the ignition timing at specific throttle position and rpm combination will be
possible. In Advanced Mode, the tuner will be able to set the timing for each
The Power Commander Ignition
Module will be
available for popular sport bike models.
This does not apply to Harley model Power Commander USBs & PC
V, as they include
ignition timing adjustment ability as part of the base unit..
The Dynojet Quick Shifter Sensors are compatible with
PCIIusb & PC V
Power Commander ONLY and allow "full throttle, clutch-
less" upshifts. These high quality sensors provide fast, accurate and reliable
shifting in conjunction with the Power Commander. Sensors are attached to the gear linkage
and connect into the Power Commander expansion port. All sensors include a Software
utility which allows the user to adjust the "Kill Time" and "Minimum RPM
Shift Point" within the Power Commander Control Center Software. "Please
note these are NOT Power Shifters. They do NOT shift for you. The allow
"full throttle, clutch- less" upshifts, by cutting the Fuel for a split second
as you start to shift..
Quick Shifter Pricing & Application
For more information,
please refer to the guide belo: Linkage Adapters ONLY Sold w/ Quick Shifters.(Not sold Separately)
Linear Sensors are universal..
Shift Rod Sensors require the gear linkage tie-rod to be modified. We are developing a
range of tie-rods for the popular models, as well as universal tie-rods that are
specifiAvailabley designed to give maximum adjustment, allowing a combination of different M6
right hand and left hand male and female threads over a wide range of 160mm to 280mm. This
will allow easy installation on many models as well as some custom rear-set applications..