GB Racing injection molded 60% long fiber
nylon supplemental engine protection cover
provides ultimate in protection for your machine!
The tough long glass fibered nylon is a high impact material
that is designed to absorb energy without cracking in most situations.
ALL GB Racing Covers are Designed to be installed over your existing OEM engine
cover,
unless otherwise specified in descriptions below.
They are Not a replacement cover and will NOT fit over aftermarket third party,
billet, heavy duty,
cast or other non-stock non-OEM covers.
Engine Cover Set - kit includes:
ALT/GEN, CLUTCH/GEAR BOX covers
Fits Standard Engine Covers ONLY GBREC-RSV4-2010-SET-GBR
$162.62
RSV4 1000 '10-'13
Clutch Cover - Fits Standard
Clutch/Gearbox Cover ONLY
GBREC-RSV4-2010-2-GBR
$94.54
RSV4 '10-'13
Race Bullet Frame Sliders - BLK
(set) - "Race" version is short, designed to eliminate leverage and
flipping and have minimal stand-off from the frame.
GBRFS-RSV4-2010-R
$81.63
RSV4 1000 '10-'13
Stator Cover - Fits Standard
ALTERNATOR/GENERATOR COVER
GBREC-RSV4-2010-1-GBR
Secondary Engine Covers Set -
Set includes Stator/Generator/Alternator cover; Clutch/Gearbox cover,
and Pulse/Ignition cover (three pieces total).
GBREC-S1000RR-2009-SET-GBR
$205.84
S 1000RR '09-'13
S 1000RR HP4 2013
Racing Clutch Cover
GBREC-S1000RR-2009-2-GBR
$83.70
S 1000RR '09-'13
S 1000RR HP4 2013
Race Bullet Frame Sliders - BLK
(set) - "Race" version is short, designed to eliminate leverage and
flipping and have minimal stand-off from the frame.
GBRFS-S1000RR-2009-R
$ 81.63
S 1000RR '09-'13
S 1000RR HP4 2013
Sport Bullet Frame Sliders - BLK
(set) - "Street" version extends past bodywork and provide some
additional bodywork protection
GBRFS-S1000RR-2009-S
$81.63
S 1000RR '09-'13
S 1000RR HP4 2013
Secondary Stator Cover
GBREC-S1000RR-2009-1-GBR
$73.40
S 1000RR '09-'13
S 1000RR HP4 2013
Secondary Pulse Cover
GBREC-S1000RR-2009-3-GBR
$59.60
S 1000RR '09-'13
S 1000RR HP4 2013
Shark Fin Chain Guard -
helps to prevent injury by blocking rider from chain and sprocket
contact near the rear wheel.
Required by many racing organizations for competition.
Requires drilling and tapping of the swingarm for installation.
GBRCGA11-GBR
$42.34
Ducati
848 Superbike '07-'13
Engine Cover Set - includes 4 pieces:
Alternator/Generator cover; Gearbox/Clutch cover; Timing/Pulse cover;
Water Pump cover
GBREC-848-2008-SET-GBR
$302.74
848 Superbike '07-'13
Secondary Clutch Cover - Fits Standard
Clutch Cover ONLY
GBREC-848-2008-2-GBR
$93.91
848 Superbike '07-'13/
1198 Superbike '07-'13
Engine Cover Set - includes 3 pieces:
Stator/Generator/Alternator cover; Oil Inspection cover, and Water Pump
Cover
GBREC-1198-2007-SET-GBR
Protection Bundle Kit - includes:
Alternator/Generator cover; Gearbox/Clutch cover; Ignition/Timing/Pulse
cover; Lower Chain Guard/Shark Fin (requires drilling and tapping of
swingarm for installation); Swingarm spools (left and right).
Fits Honda HRC Race Kit aftermarket engine
covers ONLY
GBRCP-CBR1000-2008-CS-K-GBR
$260.96
CBR 1000RR '08-'14
Protection Bundle Kit - includes:
Alternator/Generator cover; Gearbox/Clutch cover; Ignition/Timing/Pulse
cover; Lower Chain Guard/Shark Fin (requires drilling & tapping of
swingarm for installation); Swingarm spools (left & right). Fits OEM Honda Stock covers ONLY
GBRCP-CBR1000-2008-CS-GBR
$260.96
CBR 1000RR '08-'14
Engine Cover Set -
includes 3 pieces: secondary engine covers for the
HRC racing kit covers Alternator/Generator, Clutch/Transmission, and
Ignition/Pulse Fits Honda HRC Race Kit aftermarket engine
covers ONLY
GBREC-CBR1000-2008-SET-K-GBR
$205.49
CBR 1000RR '08-'14
Engine Cover Set - includes 3
pieces: secondary engine covers for the OEM Alternator/Generator,
Clutch/Transmission, and Ignition/Pulse Fits OEM Honda Stock covers ONLY
GBREC-CBR1000-2008-SET-GBR
$205.49
CBR 1000RR '08-'14
Clutch Cover - Fits
OEM Honda Stock cover ONLY
GBREC-CBR1000-2008-2-GBR
Stator Cover - Fits
STOCK OEM Alternator/Stator/Generator Cover ONLY
GBREC-CBR1000-2008-1-GBR
$72.01
CBR 1000RR '08-'14
Pulse Cover - Fits
STOCK OEM Ignition/Pulse
Cover ONLY
GBREC-CBR1000-2008-3-GBR
$57.66
CBR 600RR '07-'13
Protection Bundle Kit - includes:
Alternator/Generator cover; Gearbox/Clutch cover; Ignition/Timing/Pulse
cover; Lower Chain Guard/Shark Fin (requires drilling & tapping of
swingarm for installation); Swingarm spools (left & right). Fits OEM Honda Stock covers ONLY
GBRCP-CBR600-2008-CS-GBR
$259.86
CBR 600RR '07-'13
Protection Bundle Honda - Kit -
includes: Alternator/Generator cover; Gearbox/Clutch cover;
Ignition/Timing/Pulse cover; Lower Chain Guard/Shark Fin (requires
drilling and tapping of swingarm for installation); Swingarm spools
(left and right). Fits Honda HRC Race Kit aftermarket engine
covers ONLY GBRCP-CBR600-2008-CS-K-G
$259.86
CBR 600RR '07-'13
Engine Cover Set - includes 3 pieces:
Stator/Generator/Alternator cover; Clutch cover; Pulse/Ignition cover
Fits OEM Honda Stock covers ONLY
GBREC-CBR600-2008-SET-GBR
$204.08
CBR 600RR '07-'13
Engine Cover Set - includes 3 pieces:
Stator/Generator/Alternator cover; Clutch cover; Pulse/Ignition cover Fits Honda HRC Race Kit aftermarket engine
covers ONLY
GBREC-CBR600-2008-SET-K-GBR
$204.08
CBR 600RR '07-'13
Clutch Cover - Fits
OEM Honda Stock cover ONLY
GBREC-CBR600-2008-2-GBR
$86.70
CBR 600RR '07-'13
Stator Cover - Fits
STOCK OEM Alternator/Stator/Generator Cover ONLY
GBREC-CBR600-2008-1-GBR
$70.90
CBR 600RR '07-'13
Stator Cover - Fits *KIT
Alternator/Stator/Generator Cover ONLY *The KIT refers to factory casings, normally the alternator cover,
where race teams would purchase factory alternators that produce minimal
recharging of the battery, and increase in BHP.
So the KIT alternator cover is designed for a KIT alternator casing
which has replaced the standard manufactured casing.
GBREC-CBR600-2008-1-K-GBR
$70.90
CBR 600RR '07-'13
Pulse Cover - Fits
STOCK OEM Ignition/Pulse
Cover ONLY
GBREC-CBR600-2008-3-GBR
$57.23
CBR1000RR '08-'14
LEFT & RIGHT FRAME SLIDERS
GBRCP-CBR1000-2008-SET-GBR
$67.60
CBR 600RR '07-13;
CBR 1000RR '08-13
Shark Fin Chain Guard w/ vents
helps to prevent injury by blocking rider from chain and sprocket
contact near the rear wheel. Required by many racing organizations for
competition. Requires drilling and tapping of the swingarm for
installation.
GBRCGA10-GBR
$42.34
CBR 600RR '07-13;
CBR 1000RR '08-13
Shark Fin Chain Guard
helps to prevent injury by blocking rider from chain and sprocket
contact near the rear wheel. Required by many racing organizations for
competition. Requires drilling and tapping of the swingarm for
installation.
GBRCGA08-GBR
Protection Bundle Kit - includes:
Alternator/Generator cover; Gearbox/Clutch cover; Ignition/Timing/Pulse
cover; Swingarm spools (left & right); Lower Chain Guard/Shark Fin
(requires drilling & tapping of swingarm for installation)
GBRCP-ZX6-2009-CS-GBR
$334.54
ZX 636 '13-'14
Engine Cover Set:
includes 3 pieces: Alternator/Generator;
Clutch/Transmission; Ignition/Pulse
GBREC-ZX6-2013-SET-GBR
$204.78
ZX 6R '09-'13
Engine Cover Set:
includes 3 pieces: Alternator/Generator;
Clutch/Transmission; Ignition/Pulse
GBREC-ZX6-2009-SET-GBR
$204.78
ZX 6R '09-'13
Pulse Cover
GBREC-ZX6-2009-3-GBR
$59.22
ZX 6R '09-'13
ZX 636 '13-'14
Clutch Cover
GBREC-ZX6-2009-2-GBR
$85.46
ZX 6R '09-'13
BULLET FRAME SLIDERS RACE BLACK
GBRFS-ZX6-2009-R
$81.63
ZX 6R '07-'13
ZX 636 '13-'14
Stator Cover
GBREC-ZX6-2009-1-GBR
$70.90
ZX 6R 600 Ninja '07-'08
Protection Bundle Kit - includes:
Alternator/Generator cover; Gearbox/Clutch cover; Ignition/Timing/Pulse
cover; Swingarm spools (left & right); Lower Chain Guard/Shark Fin
(requires drilling & tapping of swingarm for installation)
GBRCP-ZX6-2007-CS-GBR
$267.24
ZX 6R '07-'08
ZX 636 '13-'14
Pulse Cover
GBREC-ZX6-2007-3-GBR
$61.42
ZX 6R 600 Ninja '07-'08
Stock Engine Cover Set - includes:
Alternator/Generator STOCK & *KIT Cover, Clutch / Gearbox Cover,
Pulse / Timing Cover. *The KIT refers to factory casings, normally the alternator cover,
where race teams would purchase factory alternators that produce minimal
recharging of the battery, and increase in BHP.
So the KIT alternator cover is designed for a KIT alternator casing
which has replaced the standard manufactured casing.
GBREC-ZX6-2007-SET-GBR
$189.94
ZX 6R '07-'08
Clutch Cover
GBREC-ZX6-2007-2-GBR
$85.46
ZX 10R '11-'14
Protection Bundle Kit -
includes: Alternator/Generator cover; Gearbox/Clutch cover;
Ignition/Timing/Pulse cover; Swingarm spools (left & right); Lower Chain
Guard/Shark Fin (requires drilling & tapping of swingarm for
installation)
GBRCP-ZX10-2011-CS-GBR
$337.98
ZX 10R '11-'14
Engine Cover Set:
includes 3 pieces: Alternator/Generator;
Clutch/Transmission; Ignition/Pulse GBREC-ZX10-2011-SET-GBR
$208.45
ZX 10R '11-'14
Clutch Cover
GBREC-ZX10-2011-2-GBR
$86.63
ZX 10R '11-'17
Race Bullet Frame Sliders - BLK
(set) - "Race" version is short, designed to eliminate leverage and
flipping and have minimal stand-off from the frame.
GBRFS-ZX10-2011-R
$81.63
ZX 10R '11-'17
Sport Bullet Frame Sliders - BLK
(set) - "Street" version extends past bodywork and provide some
additional bodywork protection
GBRFS-ZX10-2011-S
$81.63
ZX 10R '11-'14
Stator Cover
GBREC-ZX10-2011-1-GBR
$73.25
ZX 10R '11-'14
Pulse Cover
GBREC-ZX10-2011-3-GBR
$59.54
ZX 10R '08-'10
Protection Bundle Kit - includes:
Alternator/Generator cover; Gearbox/Clutch cover; Ignition/Timing/Pulse
cover; Swingarm spools (left & right); Lower Chain Guard/Shark Fin
(requires drilling & tapping of swingarm for installation)
GBRCP-ZX10-2008-CS-GBR
$268.75
ZX 10R '08-'10
Engine Cover Set -
includes 3 pieces: Alternator/Generator;
Clutch/Transmission; Ignition/Pulse
GBREC-ZX10-2008-SET-GBR
$208.45
ZX 10R '08-'10
Clutch Cover
GBREC-ZX10-2008-2-GBR
$86.63
ZX 10R '08-'10
Stator Cover
GBREC-ZX10-2008-1-GBR
$73.25
ZX 10R '08-'10
Stator Cover - Fits *KIT
Alternator/Stator/Generator Cover ONLY *The KIT refers to factory casings, normally the alternator cover,
where race teams would purchase factory alternators that produce minimal
recharging of the battery, and increase in BHP.
So the KIT alternator cover is designed for a KIT alternator casing
which has replaced the standard manufactured casing.
GBREC-ZX10-2008-1-K-GBR
$73.25
ZX 10R '08-'10
Pulse Cover
GBREC-ZX10-2008-3-GBR
$59.54
ZX 10R '08-'10
Pulse Cover - Fits *KIT Pulse
Cover ONLY *The KIT refers to factory casings, normally the alternator cover,
where race teams would purchase factory alternators that produce minimal
recharging of the battery, and increase in BHP.
So the KIT alternator cover is designed for a KIT alternator casing
which has replaced the standard manufactured casing.
GBREC-ZX10-2008-3-K-GBR
$59.54
ZX 6R 600 Ninja '07-'13
ZX 10R '08-'13
Shark Fin Chain Guard - w/ Vents
(requires drilling & tapping of swingarm for installation)
GBRCGA09-GBR
Engine Cover Set -
includes 2 pieces: Alternator/Generator;
Clutch/Transmission
GBREC-RC8-2011-SET-GBR
$187.10
Superduke 990 '05-'13
Engine Cover Set -
includes 2 pieces: Alternator/Generator;
Clutch/Transmission
GBREC-SD-SET-GBR
$185.27
Superduke 990 '05-'13
Stator Cover
GBREC-SD-1-GBR
$100.15
Superduke 990 '05-'13
Clutch Cover
GBREC-SD-2-GBR
$93.88
Superduke 990 '05-'13
Protection Bundle Kit - includes:
Alternator/Generator cover; Gearbox/Clutch cover; Lower Chain
Guard/Shark Fin (requires drilling & tapping of swingarm for
installation); Upper frame sliders; Lower frame sliders.
GBRCP-SD-CS-GBR
$371.79
Superduke 990 '05-'13
Frame Sliders Complete
Set - UPPER Left & Right Sides
GBRCP-SD-1-SET-GBR
$93.88
Superduke 990 '05-'13
Frame Sliders Complete Set - LOWER
Left & Right Sides
GBRCP-SD-2-SET-GBR
$73.86
Superduke 990&990R '05-'13
Shark Fin Chain Guard
(requires drilling & tapping of swingarm for installation)
GBRCGA08-GBR
$37.54
MV Agusta
F3 675 '12-'13
Engine Cover Set -
includes 2 pieces: Alternator/Generator;
Clutch/Transmission
GBREC-F3-675-SET-GBR
$164.85
F3 675 '12-'13
Stator Cover
GBREC-F3-675-1-GBR
$82.64
F3 675 '12-'13
Clutch Cover
GBREC-F3-675-2-GBR
$90.90
Suzuki
GSXR 1000 '09-'14
Protection Bundle Kit - includes:
Alternator/Generator cover; Gearbox/Clutch cover; Ignition/Timing/Pulse
cover; Swingarm spools (left & right); Lower Chain Guard/Shark Fin
(requires drilling & tapping of swingarm for installation)
GBRCP-GSXR1000-K9-CS-GBR
$346.31
GSXR 1000 '09-'14
Engine Cover Set:
includes 3 pieces: Alternator/Generator;
Clutch/Transmission; Ignition/Pulse
GBREC-GSXR1000-K9-SET-GBR
$217.29
GSXR 1000 '09-'14
Clutch Cover
GBREC-GSXR1000-K9-2-GBR
$ 94.43
GSXR 1000 '09-'14
Stator Cover - Fits STOCK & *KIT
Cover *The KIT refers to factory casings, normally the alternator cover,
where race teams would purchase factory alternators that produce minimal
recharging of the battery, and increase in BHP.
So the KIT alternator cover is designed for a KIT alternator casing
which has replaced the standard manufactured casing.
GBREC-GSXR1000-K9-1-K-GBR
$76.18
GSXR 1000 '09-'14
Pulse Cover
GBREC-GSXR1000-K9-3-GBR
$58.10
GSXR 1000 '05-'09
Shark Fin Chain Guard
(requires drilling & tapping of swingarm for installation)
GBRCGA10-GBR
$42.34
GSXR 1000 '05-'08
Protection Bundle Kit - includes:
Alternator/Generator cover; Gearbox/Clutch cover; Ignition/Timing/Pulse
cover; Swingarm spools (left & right); Lower Chain Guard/Shark Fin
(requires drilling & tapping of swingarm for installation)
GBRCP-GSXR1000-K3-CS-GBR
$298.45
GSXR 1000 '05-'08
Engine Cover Set -
includes 2 pieces: Alternator/Generator;
Clutch/Transmission
GBREC-GSXR1000-K3-SET-GBR
$166.48
GSXR 1000 '05-'08
Clutch Cover
GBREC-GSXR1000-K3-2-GBR
$ 100.07
GSXR 1000 '05-'08
Race Bullet Frame Sliders - BLK
(set) - "Race" version is short, designed to eliminate leverage and
flipping and have minimal stand-off from the frame.
GBRFS-GSXR1000-K5-R
$ 81.63
GSXR 1000 '05-'08
Stator Cover
GBREC-GSXR1000-K3-1-GBR
$75.05
SV 650 '99-'13
Protection Bundle Kit - includes:
Alternator/Generator cover; Gearbox/Clutch cover; Swingarm spools (left
& right); Lower Chain Guard/Shark Fin (requires drilling & tapping of
swingarm for installation)
GBRCP-SV650-1999-CS-GBR
$204.19
SV 650 '99-'13
Engine Cover Set -
includes 2 pieces: Alternator/Generator;
Clutch/Transmission
GBREC-SV650-1999-SET-GBR
$143.85
SV 650 '99-'13
Clutch Cover
GBREC-SV650-1999-2-GBR
$83.90
SV 650 '99-'13
Stator Cover
GBREC-SV650-1999-1-GBR
$67.53
SV 650 '99-'13
Shark Fin Chain Guard
GBRCGA29-GBR
$41.12
GSXR 600 & 750 '06-'14
Protection Bundle Kit - includes:
Alternator/Generator cover; Gearbox/Clutch cover; Ignition/Timing/Pulse
cover; Swingarm spools (left & right); Lower Chain Guard/Shark Fin
(requires drilling & tapping of swingarm for installation)
GBRCP-GSXR600-K6-CS-GBR
Engine Cover Set
- includes 3 pieces:
Alternator/Generator; Clutch/Transmission; Ignition/Pulse
GBREC-D675R-2013-SET-GBR
$177.81
Daytona 675R '13-'14
Street Triple 675R '13-'14
Pulse Cover
GBREC-D675R-2013-3-GBR
$
51.84
Daytona 675R '13-'14
Street Triple 675R '13-'14
Stator Cover
GBREC-D675R-2013-1-GBR
$70.75
Daytona 675R '11-'12
Street Triple 675R '11-'12
Engine Cover Set
- includes 3 pieces:
Alternator/Generator; Clutch/Transmission; Ignition/Pulse
GBREC-D675R-2011-SET-GBR
$170.99
Daytona 675R '11-'12
Street Triple 675R '11-'14
Stator Cover
GBREC-D675R-2011-1-GBR
$67.34
Daytona 675R '11-'12
Street Triple 675R '11-'14
Clutch Cover
GBREC-D675R-2011-2-GBR
$65.09
Daytona 675/R '06-'12
Street Triple 675/R '07-'12
Race Bullet Frame Sliders w/
Brackets - BLK (set) - "Race" version is short, designed to eliminate
leverage and flipping and have minimal stand-off from the frame. NO
FAIRING MODS. REQ. GBRFS-675-2006-CS-R
$146.74
Daytona 675/R '06-'12
Street Triple 675/R '07-'12
Sport Bullet Frame Sliders w/
Brackets - BLK (set) - "Street" version extends past bodywork and
provide some additional bodywork protection NO FAIRING MODS. REQ.
GBRFS-675-2006-CS-S
$146.74
Daytona 675 '06-'10
Street Triple '07-'10
** Protection Bundle Kit - includes: Alternator/Generator cover; Gearbox/Clutch cover;
Timing/Pulse cover; Frame Sliders (left & right); Lower Chain
Guard/Shark Fin (requires drilling & tapping of swingarm for
installation); 6mm Swingarm spools (left & right); Front Axle
Slider/Fork Protector ** The clutch cover included with this kit fits
2006-2010 675 models WITHOUT "Triumph" embossed on the clutch cover.
There are a few (handful) of machines (675 + 675R) that were apparently
produced from 2011-2012 which also lack the "Triumph" and will use this
cover. Please verify your original engine covers before ordering, and
contact us to ensure you receive the correct GB Racing covers/set for
your machine.
GBRCP675-CS-6MM-GBR
$410.34
Daytona 675 '06-'10
Street Triple '07-'10
** Protection Bundle Kit
- includes: Alternator/Generator cover; Gearbox/Clutch cover; Timing/Pulse
cover; Frame Sliders (left & right); Lower Chain Guard/Shark Fin
(requires drilling & tapping of swingarm for installation); 8mm Swingarm
spools (left & right); Front Axle Slider/Fork Protector
** The clutch cover included with this kit fits
2006-2010 675 models WITHOUT "Triumph" embossed on the clutch cover.
There are a few (handful) of machines (675 + 675R) that were apparently
produced from 2011-2012 which also lack the "Triumph" and will use this
cover. Please verify your original engine covers before ordering, and
contact us to ensure you receive the correct GB Racing covers/set for
your machine. GBRCP675-CS-8MM-GBR
$410.34
Daytona 675 '06-'10
Street Triple '07-'10
Protection Bundle Triumph - For
*KIT Engine Covers ONLY- kit includes: Alternator/Generator
cover; Gearbox/Clutch cover; Timing/Pulse cover; Frame Sliders (left &
right); Lower Chain Guard/Shark Fin (requires drilling & tapping of swingarm for installation); 6mm Swingarm
spools (left & right); Front Axle Slider/Fork Protector. *The KIT refers to factory casings, normally
the alternator cover, where race teams would purchase factory
alternators that produce minimal recharging of the battery, and increase
in BHP.
So the KIT alternator cover is designed for a KIT alternator casing
which has replaced the standard manufactured casing.
GBRCP675-CS-K-GBR
$410.34
Daytona 675 '06-'10
Street Triple '07-'10
Engine Cover Set - Fits *KIT
Engine Covers ONLY
Set - includes 3 pieces:
Alternator/Generator; Clutch/Transmission; Ignition/Pulse *The KIT refers to factory casings, normally the
alternator cover, where race teams would purchase factory alternators
that produce minimal recharging of the battery, and increase in BHP.
So the KIT alternator cover is designed for a KIT alternator casing
which has replaced the standard manufactured casing.
GBREC-D675-SET-K-GBR
$173.78
Daytona 675 '06-'10
Street Triple '07-'10
** Engine Cover Set - Set
- includes 3 pieces:
Alternator/Generator; Clutch/Transmission; Ignition/Pulse ** The clutch cover included with this kit fits
2006-2010 675 models WITHOUT "Triumph" embossed on the clutch cover.
There are a few (handful) of machines (675 + 675R) that were apparently
produced from 2011-2012 which also lack the "Triumph" and will use this
cover. Please verify your original engine covers before ordering, and
contact us to ensure you receive the correct GB Racing covers/set for
your machine.
GBREC-D675-SET-GBR
$162.73
Daytona 675 '06-'10
Street Triple '07-'10
Stator Cover - Fits *KIT
Alternator/Stator/Generator Cover ONLY *The KIT refers to factory casings, normally the
alternator cover, where race teams would purchase factory alternators
that produce minimal recharging of the battery, and increase in BHP.
So the KIT alternator cover is designed for a KIT alternator casing
which has replaced the standard manufactured casing.
GBREC-D675-1-K-GBR
$77.76
Daytona 675 '06-'10
Street Triple '07-'10
Stator Cover
GBREC-D675-1-GBR
$65.09
Daytona 675 '06-'10
Street Triple '07-'10
Clutch Cover
GBREC-D675-2-GBR
$ 57.58
Daytona 675/R '06-'12
Street Triple 675&675R '07-'12
Pulse Cover - Does NOT
Fit Triumph Racing "KIT" Cover
GBREC-D675-3-GBR
$47.57
Yamaha
R1 '09-'14
Protection Bundle Kit - For *KIT Engine Covers ONLY includes: Alternator/Generator cover; Gearbox/Clutch cover;
Ignition/Timing/Pulse cover; Swingarm spools (left & right) *The KIT refers to factory casings, normally
the alternator cover, where race teams would purchase factory
alternators that produce minimal recharging of the battery, and increase
in BHP.
So the KIT alternator cover is designed for a KIT alternator casing
which has replaced the standard manufactured casing.
GBRCP-R1-2009-CS-K-GBR
Engine Cover Set - Fits *KIT
Engine Covers ONLY
Set - includes 3 pieces:
Alternator/Generator; Clutch/Transmission; Ignition/Pulse *The KIT refers to factory casings, normally
the alternator cover, where race teams would purchase factory
alternators that produce minimal recharging of the battery, and increase
in BHP.
So the KIT alternator cover is designed for a KIT alternator casing
which has replaced the standard manufactured casing. GBREC-R1-2009-SET-K-GBR
$205.15
R1 '09-'14
Engine Cover Set (for OEM covers) -
includes 3 pieces: Alternator/Generator;
Clutch/Transmission; Ignition/Pulse
GBREC-R1-2009-SET-GBR
$205.15
R1 '09-'14
Clutch Cover -
Fits Standard Cover ONLY
GBREC-R1-2009-2-GBR
$87.07
R1 '09-'14
Stator Cover - Fits Standard
Cover ONLY
GBREC-R1-2009-1-GBR
$70.63
R1 '09-'14
Stator Cover - Fits *KIT
Alternator/Stator/Generator Cover ONLY *The KIT refers to factory casings, normally
the alternator cover, where race teams would purchase factory
alternators that produce minimal recharging of the battery, and increase
in BHP.
So the KIT alternator cover is designed for a KIT alternator casing
which has replaced the standard manufactured casing. GBREC-R1-2009-1-K-GBR
$70.63
R1 '09-'14
Pulse Cover - Fits Standard Cover
ONLY
GBREC-R1-2009-3-GBR
Engine Cover Set -
includes 4 pieces: Alternator/Generator;
Clutch/Transmission; Ignition/Pulse; Crankshaft End Cover
GBREC-R1-2007-SET-GBR
$ 252.86
R1 '07-'08
Frame Sliders Set
GBRCP-R1-2007-SET-GBR
$123.94
R1 '07-'08
Clutch Cover
GBREC-R1-2007-2-GBR
$86.39
R1 '07-'08
Ignition Pulse Cover
GBREC-R1-2007-3-GBR
$60.09
R1 '07-'08
Crankshaft End Cover
GBREC-R1-2007-4-GBR
$50.06
FZ 09/MT09 '14-15
Engine Cover Set -
includes 4 pieces: Alternator/Generator;
Clutch/Transmission; Ignition/Pulse; Water Pump Cover
GBREC-MT09-2014-SET-GBR
$271.52
FZ 09/MT09 '14-15
Water Pump Cover
GBREC-MT09-2014-5-GBR
$58.79
FZ 09/MT09 '14-15
Ignition Cover
GBREC-MT09-2014-3-GBR
$64.10
FZ 09/MT09 '14-15
Clutch Cover
GBREC-MT09-2014-2-GBR
$89.22
FZ 09/MT09 '14-15
Stator/Alternator Cover
GBREC-MT09-2014-1-GBR
$73.69
R6 '06-'14
Protection Bundle Kit - For *KIT Engine Covers ONLY includes: Alternator/Generator cover; Gearbox/Clutch cover;
Ignition/Timing/Pulse cover; Swingarm spools (left & right); Frame
Sliders (left & right); Lower Chain Guard/Shark Fin (requires drilling &
tapping of swingarm for installation) *The KIT refers to factory casings, normally
the alternator cover, where race teams would purchase factory
alternators that produce minimal recharging of the battery, and increase
in BHP.
So the KIT alternator cover is designed for a KIT alternator casing
which has replaced the standard manufactured casing.
GBRCP-R6-2008-CS-K-GBR
Engine Cover Set (for OEM covers) -
includes 3 pieces: Alternator/Generator;
Clutch/Transmission; Ignition/Pulse
GBREC-R6-2008-SET-GBR
$189.15
R6 '06-'14
Engine Cover Set - Fits *KIT
Engine Covers ONLY
Set - includes 3 pieces:
Alternator/Generator; Clutch/Transmission; Ignition/Pulse *The KIT refers to factory casings, normally
the alternator cover, where race teams would purchase factory
alternators that produce minimal recharging of the battery, and increase
in BHP.
So the KIT alternator cover is designed for a KIT alternator casing
which has replaced the standard manufactured casing.
GBREC-R6-2008-SET-K-GBR
$189.15
R6 '06-'14
Race Bullet Frame Sliders - BLK
(set) - "Race" version is short, designed to eliminate leverage and
flipping and have minimal stand-off from the frame.
GBRFS-R6-2006-R
$81.63
R6 '06-'14
Sport Bullet Frame Sliders - BLK
(set) - "Street" version extends past bodywork and provide some
additional bodywork protection
GBRFS-R6-2006-S
$81.63
R6 '06-'14
Clutch Cover - fits OEM cover
GBREC-R6-2008-2-GBR
$77.62
R6 '06-'14
Stator Cover - fits OEM cover
GBREC-R6-2008-1-GBR
$70.10
R6 '06-'14
Stator Cover - Fits *KIT
Alternator/Stator/Generator Cover ONLY *The KIT refers to factory casings, normally the
alternator cover, where race teams would purchase factory alternators
that produce minimal recharging of the battery, and increase in BHP.
So the KIT alternator cover is designed for a KIT alternator casing
which has replaced the standard manufactured casing.
GBREC-R6-2008-1-K-GBR
$70.10
R6 '06-'14
Pulse Cover - fits OEM cover only
GBREC-R6-2008-3-GBR
$50.06
R6 '05-'10
Shark Fin Chain Guard w/ vents -
(requires drilling & tapping of swingarm for installation)
GBRCGA10-GBR
$42.34
R6 '05-'10
R1 '07-'08
Shark Fin Chain Guard -
(requires drilling & tapping of swingarm for installation)
GBRCGA08-GBR
$37.54
FZS 800 FZ8 Fazer '10-'14
FZ 1000 Fazer
'09-'14
Protection Bundle - includes 6 pieces: Alternator/Generator cover; Gearbox/Clutch cover;
Ignition/Timing/Pulse cover; Crank Cover; Swingarm spools (left & right); Lower Chain Guard/Shark Fin
(requires drilling &
tapping of swingarm for installation)
GBRCP-FZ8-2010-CS-GBR
$310.71
FZS 800 Fazer '10-'14
FZ 1000 Fazer '09-'14
Engine Cover Set -
includes 4 pieces: Alternator/Generator;
Clutch/Transmission; Ignition/Pulse; Crank Cover
GBREC-FZ8-2010-SET-GBR
