Brembo Brake Master Cylinder MX PS10x19 w/ Integrated Reservoir, XA2B3A0 (FREE EXPRESS SHIPPING)
Brembo Front Brake Master Cylinder MX PS 10x19 w/ Integrated Reservoir, Axial, Cast, Black
pn: XA2B3A0
Special Notes:
This is a Universal RACE Part. Brembo Parts are NOT bike Specific.
Most Likely your current brake lines have Course Threaded (10x1.25) Banjo Bolts. You will need One of these Fine Threaded (10x1.0) Banjo Bolts to replace your current one.
Select: Double Banjo For Dual Lines off your Mastercylinder (usually aftermarket stainless)
Select: Single Banjo For One Line off the Mastercylinder (usually stock setup)
Most stock MC use a 8mm hose and nipple for the fluid reservoir. Brembo uses a 6mm. We HIGHLY RECOMMENDED to get the 6mm brake hose & Reservoir kit option.
One Last Note. We do NOT sell these Optional Accessories separately. So be sure to Add the Extras you Need, WITH your Mastercylinder.
If you are not sure, Call Us: 704-799-2192
Brembo Brake Master Cylinder MX PS10x19 w/ Integrated Reservoir.
This brake master cylinder gives a firmer lever feel and more consistent braking than the stock unit. Questions on fitment? Call 704-799-2192 and we'll make sure it's right for your bike before you order.
-
Add HardRacing "Factory Logo" T-Shirt : only $5.95No Thanks., Yes, please add Small/BLACK (+$6.95), Yes, please add MED/BLACK (+$6.95), Yes, please add LARGE/BLACK (+$6.95), Yes, please add XL/BLACK (+$6.95), Yes, please ADD (2XL)BLACK (+$8.95 )
-
Add Reservoir & Hose ?No Option, Add Universal Brake Fluid Reservoir & Hose (+$12)
-
Add Dble Banjo ?No Option, Add Double Banjo Bolt (10x1.0) w/ Washers (+$9)
-
Add Single Banjo ?No Option, Add Single Banjo Bolt (10x1.0) w/ Washers (+$8)
