Product Details:
Complete high-performance exhaust solution for the E90/92/93 M3;
includes Maxflo Performance Exhaust System, Secondary Catbypass X-Pipe,
200-cell HJS Primary Sportcats, and an ECU Upgrade.
Fabspeed's E90/92/93 M3 Performance Package replaces the restrictive OEM
rear mufflers for a deeper, throatier exhaust note and improved power
and throttle response. The included Secondary Catbypass X-Pipe replaces
the redundant factory catalytic converters with a high-flowing x-pipe
section which increases sound and power. Lastly, the heavy and
restrictive factory primary cats are replaced by Fabspeed's
high-performance 200-cell HJS Sport Catalytic Converters for increased
power, sound, and emissions compliancy.
Ensure maximum power gains with the optional ECU Upgrade which optimizes
the air/fuel ratios, timing, and more in order to take full advantage of
the upgraded exhaust components.
FEATURES:
Fits all BMW E90/92/93 M3 vehicles (2007-2013)
Saves 24 lbs. versus the factory components and increases power by 27
whp and 19 ft-lbs of torque
Dramatic improvement in sports car sound and power throughout the RPM
range
Constructed from high-quality 14-16 gauge C.N.C. mandrel-bent T304L
stainless steel for optimum flow and maximum durability
All included Fabspeed components are direct bolt-on replacements for the
factory counterparts
All Fabspeed performance products are backed by the Fabspeed Lifetime
Limited Warranty
NOTE: Fabspeed’s 200-cell high-flow catalytic converters are not C.A.R.B.
certified and are for Off-Road Use ONLY in the state of California
FS.BMW.E9X.SPKGE FS.BMW.E9X.SPKG
Sale Price Starts at $4875
BMW M3 E90 / 92 / 93 Primary Catbypass Pipes
Product Details:
Straight-through mandrel bent pipes replace the restrictive factory
primary catalytic converters for maximum exhaust flow, power and sound.
FEATURES:
Fits all BMW E90/92/93 M3 vehicles (2007-2013)
Constructed from 14-16ga T304L stainless steel CNC mandrel bent tubing
for maximum performance and durability
Includes 02 sensor bungs for simple installation
Compatible with stock secondary catalytic converters or Fabspeed's
Secondary Catbypass X-Pipe
All Fabspeed performance products are backed by the Fabspeed Lifetime
Limited Warranty
NOTE: Fabspeed’s Primary Catbypass Pipes are not C.A.R.B. certified and
are for Off-Road Use ONLY in the state of California. This product
replaces the factory catalytic converters and may trigger a Check Engine
Light.
FS.BMW.E9X.PCB
$995
BMW M3 E90 / 92 / 93 Maxflo
Performance Exhaust System
Fabspeed's performance mufflers and tips
replace the restrictive factory muffler system for improved sports car
sound, weight savings, and increased power.
-Fits all BMW E90/92/93 M3 vehicles (2007-2013)
-Includes polished chrome outlet tips
-Adds 10 whp and 7 ft-lbs of torque to the wheels
-Saves 17 lbs over the OEM mufflers
-Constructed from T304L stainless steel CNC mandrel bent tubing for
maximum performance and durability
-Direct bolt-on installation; no cutting or welding required
-Complies with most state emissions and inspection regulations
-Directly compatible with the stock secondary catalytic converters or
Fabspeed’s Secondary Catbypass X-Pipe for even more power and sound
-All Fabspeed performance products are backed by the Fabspeed Lifetime
Limited Warranty
FS.BMW.E9X.MAXP
$1595
Order Online and Receive FREE
$100 e-Gift Card
BMW M3 E90 / 92 / 93 Sport
Catalytic Converters
High-performance 200-cell HJS catalytic
converters replace the restrictive factory primary catalytic converters
for increased exhaust flow and improved power and sound.
-Fits all BMW E90/92/93 M3 vehicles (2007-2013)
-Constructed from 14-16ga T304L stainless steel CNC mandrel bent tubing
for maximum performance and durability
-Uses 200 cell German Imported high flow sport catalytic converters
-Compatible with stock secondary catalytic converters or Fabspeed's
Secondary Catbypass X-Pipe
-All Fabspeed performance products are backed by the Fabspeed Lifetime
Limited Warranty
-NOTE: Fabspeed’s 200-cell high-flow catalytic converters are not
C.A.R.B. certified and are for Off-Road Use ONLY in the state of
California
FS.BMW.E9X.PSC
$2295
Order Online and Receive FREE
$100 e-Gift Card
BMW M3 E90 / 92 / 93 Secondary
Catbypass X- Pipe
Replaces the restrictive and redundant
factory secondary catalytic converters with a free-flowing x-pipe
section which increases power and sound; available with or without
resonators for additional weight savings.
-Fits all BMW E90/92/93 M3 vehicles (2007-2013)
-Increases horsepower and torque by 15 whp and 8 ft-lbs
-Can be ordered with or without resonators; Non-resonated configuration
is recommended for track/off-road use only due to the aggressive exhaust
note.
-Constructed from high-quality 14-16ga T304L stainless steel for optimum
performance and reliability
-Complies with most emissions & inspections regulations
-All Fabspeed performance products are backed by the Fabspeed Lifetime
Limited Warranty
Pricing Starts At
$995 Order Online and Receive FREE
$100 e-Gift Card
BMW M3 E46 Performance Package
Product Details:
Total performance solution for the E46 M3 replaces the factory headers,
catalytic converters, and mid-pipe with high performance components
engineered to improve power and sound; ECU software upgrade available
for maximum power gains
INCLUDES:
M3 E46 Sport Headers
M3 E46 Sport Catalytic Converters
M3 E46 BMC F1 Replacement Air Filter
M3 E46 ECU Software Tuning Upgrade (optional)
FEATURES:
Fits all BMW E46 M3 vehicles (2000-2006)
High performance headers replace the restrictive factory headers for
increased exhaust flow
Factory catalytic converters are replaced by high performance 200-cell
HJS Sport Cats for optimum performance
BMC F1 Air Filter increases cold air induction
ECU software upgrade reprograms the engine's computer in order to take
full advantage of the high performance components
All exhaust components are a simple bolt-on installation; no cutting or
welding required
All Fabspeed products are backed by Fabspeed's Lifetime Limited Warranty
NOTE: Fabspeed’s 200-cell high-flow catalytic converters are not C.A.R.B.
certified and are for Off-Road Use ONLY in the state of California
FS.BMW.E46.SPKG
FS.BMW.E46.SPKGE
Sale Price Starts at $2795
BMW M3 E46 Sport Headers
Direct replacement/upgrade for the
failure-prone factory headers; lighter, higher flowing, and more durable
for increased performance and longevity
-Fits all left-hand-drive BMW E46 M3 vehicles
(2000-2006) NOTE: Does not fit
right-hand-drive models!
-Increases power and throttle response
-Saves 3 lbs versus heavy and more restrictive factory headers
-Constructed from T304L stainless steel with 1-piece CNC mandrel bent
primary tubes and F1-style merge collectors
-Designed without pre-cats in the headers for increased flow and
performance
-Direct replacement for factory restrictive headers
-Simple DIY bolt-on installation
-All Fabspeed performance products are backed by the Fabspeed Lifetime
Limited Warranty
FS.BMW.E46.SHDR
$1195
Order Online and Receive FREE $100
e-Gift Card
BMW M3 E46 Sport Catalytic
Converters
Replaces the restrictive factory cats
with high-performance HJS Racing sport cats for maximum performance and
sound
-Fits all BMW E46 M3 vehicles (2000-2006)
-Improves power and throttle response
-Saves weight from the vehicle versus factory restrictive cats
-Constructed with Fabspeed-proprietary 200-cell HJS high-flowing
catalytic converters using T304L stainless steel
-Direct replacement for stock cats
-Simple bolt-on installation
-All Fabspeed performance products are backed by the Fabspeed Lifetime
Limited Warranty
-NOTE: Fabspeed’s 200-cell high-flow catalytic converters are not
C.A.R.B. certified and are for Off-Road Use ONLY in the state of
California
FS.BMW.E46.SC
$1995
Order Online and Receive FREE $100
e-Gift Card
BMW M3 & M4
F8x (2014+)
BMW M3 & M4 F80 / F82 Valvetronic
Exhaust System
The ultimate catback exhaust system
for the Ultimate Driving Machine includes Fabspeed's high performance
Valvetronic rear muffler and exclusive "Double-X" midpipe for the
perfect combination of sound and power. Available with Polished or Black
Chrome tips.
The ultimate catback exhaust system for the Ultimate Driving Machine
includes Fabspeed's high performance Valvetronic rear muffler and
exclusive "Double-X" midpipe for the perfect combination of sound and
power.
Pure and simple, you're looking at the best-sounding M3/M4 exhaust
system on the market.
FEATURES:
Fits all BMW F8x M3 & M4 sedan / coupe vehicles (2015+) - Does not fit
F83 convertibles
Includes Deluxe Quad-Style Tips in a Polished Chrome, Black Chrome, or
Single Wall Brushed finish
World's first and only "Double-X" midpipe design includes two "x"
sections for increased exhaust scavenging, resulting in the smoothest
possible exhaust note with the least amount of rasp
Constructed in-house at Fabspeed from 16ga / .065" thick CNC
mandrel-bent T304L stainless steel in 2.75" diameter for the best
durability
Integrated muffler valves include machined mounts for the factory
actuators, allowing retention of factory valve functionality
Adds 19 whp and 31 ft/lbs of torque at 3300 RPM
FS.BMW.F8X.VLVP FS.BMW.F8X.VLVB FS.BMW.F8X.VLBR
Product Details:
Eliminate the heavy and restrictive factory catalytic converters with
straight-pipe, high flowing stainless steel downpipes for maximum power
and an exhilarating sound.
FEATURES:
Fits all BMW F8x M3 & M4 vehicles (2015+)
The perfect option for track cars and those who seek the ultimate in
agressive exhaust sound
Mandrel bent pipes with minimal welds to minimize failure under regular
use and increase flow
Designed to fit seamlessly with the factory exhaust system, or as an
add-on to Fabspeed's Valvetronic Exhaust System. (Also compatible with
any other aftermarket exhaust system that is designed to fit like OEM.)
Replaces the restrictive factory catalytic converters with a
straight-through "straight-pipe" design for maximum power and exhaust
sound.
NOTE: Catbypass downpipes are recommended for track or off-road use
only.
FS.BMW.F8X.PCBDP
$995
BMW M3 & M4 F80 / F82 Secondary Catbypass X-Pipe
Product Details:
Increase power and sound with a free-flowing x-pipe section that
replaces the restrictive and redundant factory secondary catalytic
converters for increased exhaust flow.
This system was born through a customer's request for a more aggressive
exhaust note out of his M-Performance rear muffler equipped M3, and when
it comes to new development we are happy to oblidge. We have developed a
secondary catbypass X-pipe to remove the restrictive factory catalytic
converters and improve the sound. Up the tone without drone!
FEATURES:
Fits all BMW F80 / F82 M3 & M4 vehicles (2015+) equipped with the
M-Performance Exhaust. Requires cutting for fitment with the factory
exhaust. Does not fit F83 convertible.
Dramatic improvement in exhaust tone
Direct replacement for restrictive and redundant OEM secondary catalytic
converters
Constructed in-house at Fabspeed from 14-16ga CNC mandrel-bent T304L
stainless steel
Flanges and braces waterjet cut and CNC milled in-house by our precision
machine shop
Simple bolt-on installation with NO check engine lights
All Fabspeed performance products are backed by the Fabspeed Lifetime
Limited Warranty
FS.BMW.F8X.SCBX
$1295
BMW
335i & 435i (F3X)
BMW 335i & 435i (F30/F32)
Valvetronic Performance Exhaust System
Product Details:
The ultimate catback exhaust system for the Ultimate Driving Machine
includes Fabspeed's high performance Valvetronic rear muffler and CNC
mandrel bent midpipes for the perfect combination of sound and power.
FEATURES:
Fits BMW F30/F32 335i & 435i vehicles, does NOT fit convertibles.
Constructed in house at Fabspeed from high-quality 14-16 gauge C.N.C.
mandrel-bent T304L stainless steel for optimum flow and maximum
durability
Includes Deluxe Tips in a Polished Chrome finish
Integrated muffler valve includes machined mounts for the factory
actuators, allowing retention of factory valve functionality
All Fabspeed performance products are backed by the Fabspeed Lifetime
Limited Warranty
FS.BMW.F3X.VLVP
$2595
BMW 335i & 435i (F30/F32) Muffler
Bypass Exhaust System
Product Details:
Up the aggression and drop weight while unleashing the visceral tones of
the N55 engine
There are loud exhausts, there are great sounding exhausts. When you
have a loud AND great sounding system....335i OH MY! The N55 has a great
voice to match the power it produces, and we wanted to let it sing. Our
Muffler Bypass Exhaust System deletes the rear muffler, shedding 14 lbs
in the process. This is an exhaust for those who like it aggressive.
Expect an intoxicating and menacing barrage of pops and crackles upon
deceleration. In cabin tone is very reasonable, with our Sport Cat
Downpipe installed we would have no qualms daily driving it at all.
FEATURES:
Fits all BMW 335i & 435i (F30/F32) vehicles
Saves 14 lbs from the rear of the vehicle
Will make everyone you know envious of the glorious sound errupting from
your BMW
14-16ga T304L 3"-2.5" stainless steel piping
Includes tips in either 3" Polished Chrome, 3" Black Chrome, or 3.5"
Carbon Fiber
All Fabspeed performance products are backed by the Fabspeed Lifetime
Limited Warranty
NOTE: Installation requires cutting the factory exhaust near a factory
break point. Everything required for installation is included. The
Fabspeed system installs quickly over the factory piping using the
included Torca clamp. Reinstallation of the factory rear muffler (for
our friends with leased vehicles) is quick and easy!
FS.BMW.F3X.MBEP FS.BMW.F3X.MBEB FS.BMW.F3X.MBECF
$895
BMW 335i & 435i (F30/F32) Sport Cat Downpipe
Product Details:
Inject new life into your 335i or 435i with a high-flow catted downpipe!
Genuine 200-cell HJS catalyst instantly adds significant power, sound,
and throttle response without triggering a check engine light!
FEATURES:
Fits all BMW F30/F32 335i & 435i vehicles. We created two different
flange styles to ensure proper fitment across all years
Designed with a 200-cell HJS catalyic converter core for maximum
performance and reliability; utilizes the same cat core from our Ferrari
458 Italia applications
Direct bolt-on replacement; no cutting or welding required
Does not trigger a check engine light
2lb weight reduction
Complies with most emissions regulations (NOTE: It the purchaser's
responsibility to verify legality and compliance in their region.)
IMPORTANT NOTE: There are two flange types for the 335i and 435i,
depending on the wastegate style of the turbo. Pre 08/2013, a smaller
flange is utilized. The build date of your car can be found on a sticker
on the driver's side door jam. If you need assistance determining which
version you have, please contact us before ordering.
FS.BMW.F3X1.SCDP FS.BMW.F3X2.SCDP
$1195
BMW 335i & 435i (F30/F32) Catbypass Downpipe
Product Details:
The ultimate catless downpipe offering maximum power and sound;
recommended for track and off-road use
FEATURES:
Fits all BMW F30/F32 335i & 435i vehicles. We created two different
flange styles to ensure proper fitment across all years
Replaces the two restrictive factory catalytic converters with a
free-flowing straight pipe section for maximum exhaust flow
Greatly increased throttle response and noticeable power gains
A more aggressive note to the exhaust tone
Direct bolt-on replacement; no cutting or welding required
Recommended for track and off-road use only (NOTE: It the purchaser's
responsibility to verify legality and compliance in their region.)
A check engine light is possible due to the deletion of factory
catalytic converters. We highly recommend a tune or tuning device.
Please contact us for all tuning information.
IMPORTANT NOTE: There are two flange types for the 335i and 435i,
depending on the wastegate style of the turbo. Pre 08/2013, a smaller
flange is utilized. The build date of your car can be found on a sticker
on the driver's side door jam. If you need assistance determining which
version you have, please contact us before ordering.
FS.BMW.F3X1.CBDP FS.BMW.F3X2.CBDP
$595
BMW
E71 X6M
BMW X6M E71 Supercup Exhaust
System
Replaces the heavy factory mufflers and
tips with lightweight free-flowing straight-through pipes for increased
power and sound; available with polished chrome or black chrome Deluxe
Quad-Style Tips
FEATURES:
Fits all BMW X6M (E71) vehicles
Adds an aggressive throaty exhaust note
Improves power and throttle response by maximizing the exhaust flow
Straight-through tubing design maximizes flow with better results than
other exhaust offerings on the market
Simple DIY slip-on installation; no welding required
All Fabspeed performance products are backed by the Fabspeed Lifetime
Limited Warranty
FS.BMW.E71.SCUPP FS.BMW.E71.SCUPB
$1895
BMW
E70 X5M
BMW X5M E70 Supercup Exhaust
System
Replaces the heavy factory mufflers and
tips with lightweight free-flowing straight-through pipes for increased
power and sound; available with polished chrome or black chrome Deluxe
Quad-Style Tips
FEATURES:
Fits all BMW X5M (E70) vehicles
Adds an aggressive throaty exhaust note
Improves power and throttle response by maximizing the exhaust flow
Straight-through tubing design maximizes flow with better results than
other exhaust offerings on the market
Simple DIY slip-on installation; no welding required
All Fabspeed performance products are backed by the Fabspeed Lifetime
Limited Warranty
FS.BMW.E70.SCUPP FS.BMW.E70.SCUPB
$1895
BMW
M5 F10 (2011+)
BMW M5 F10 Primary Sport Cat
Downpipes
Replaces the restrictive factory cats
with high-performance 200-cell HJS Sport Cats for maximum performance
and a more aggressive exhaust note
Product Details:
Eliminate the heavy and restrictive factory catalytic converters with
straight-pipe, high flowing stainless steel downpipes for maximum power
and an exhilarating sound.
FEATURES:
Fits all BMW F10 M5 vehicles (2011+)
Replaces the restrictive factory catalytic converters with high flowing
200 cell HJS catalystic converters for inceased throttle response, and a
more aggressive exhaust sound
Constructed out of T304L stainless steel with CNC machined flanges and
laser cut brackets
Manufactured entirely in-house by our precision machine shop at Fabspeed
Motorsport
Designed to fit seamlessly with the factory exhaust system and are also
compatible with any other aftermarket exhaust system that is designed to
fit like OEM
Includes two downpipes, labeled left side and right side for easy
installation, and hardware
FS.BMW.F10.PSCDP
$2995
BMW M5 F10 Primary Catbypass Downpipes
Eliminate the heavy and restrictive
factory catalytic converters with straight-pipe, high flowing stainless
steel downpipes for maximum power and an exhilarating sound
Product Details:
Eliminate the heavy and restrictive factory catalytic converters with
straight-pipe, high flowing stainless steel downpipes for maximum power
and an exhilarating sound.
FEATURES:
Fits all BMW F10 M5 vehicles (2011+)
Replaces the restrictive factory catalytic converters with a
straight-through "straight-pipe" design for maximum power, inceased
throttle response, and an aggressive exhaust sound
Constructed out of T304L stainless steel with CNC machined flanges and
laser cut brackets
Manufactured entirely in-house by our precision machine shop at Fabspeed
Motorsport
Designed to fit seamlessly with the factory exhaust system and are also
compatible with any other aftermarket exhaust system that is designed to
fit like OEM
Includes two downpipes, labeled left side and right side for easy
installation, and hardware
NOTE: Catbypass downpipes are recommended for track or off-road use
only.
FS.BMW.F10.PCBDP
$1195
BMW M5 F10 Muffler Bypass Pipes
Muffler Bypass Pipes for the BMW F10 M5
include polished 4" quad-style tips with a perforated core and
straight-through design for maximum flow performance and a refined yet
authoritative sound.
Product Details:
Replaces the heavy factory mufflers and tips with lightweight
free-flowing straight-through pipes for increased power and sound;
includes polished chrome Deluxe Quad-Style Tips
FEATURES:
Fits all BMW M5 (F10) vehicles (2011+)
Adds an aggressive throaty exhaust note
Saves over 14lbs vs. the factory mufflers
Improves power and throttle response by maximizing the exhaust flow
Straight-through tip design maximizes flow with better results than
other y-pipe designs on the market
Simple DIY slip-on installation; no welding required
All Fabspeed performance products are backed by the Fabspeed Lifetime
Limited Warranty
FS.BMW.F10.MBP
$1395
BMW
M6 F12 (2012+)
BMW M6 F12 / F13 Primary Catbypass
Downpipes
Eliminate the heavy and restrictive
factory catalytic converters with straight-pipe, high flowing stainless
steel downpipes for maximum power and an exhilarating sound
Product Details:
Eliminate the heavy and restrictive factory catalytic converters with
straight-pipe, high flowing stainless steel downpipes for maximum power
and an exhilarating sound.
FEATURES:
Fits all BMW F12 / F13 M6 vehicles (2012+)
Replaces the restrictive factory catalytic converters with a
straight-through "straight-pipe" design for maximum power, increased
throttle response, and an aggressive exhaust sound
Constructed out of T304L stainless steel with CNC machined flanges and
laser cut brackets
Manufactured entirely in-house by our precision machine shop at Fabspeed
Motorsport
Designed to fit seamlessly with the factory exhaust system and are also
compatible with any other aftermarket exhaust system that is designed to
fit like OEM
Includes two downpipes, labeled left side and right side for easy
installation, and hardware
NOTE: Catbypass downpipes are recommended for track or off-road use
only.
FS.BMW.F12.PCBDP
$1195
BMW M6 F12 / F13 Primary Sport Cat
Downpipes
Replaces the restrictive factory cats
with high-performance 200-cell HJS Sport Cats for maximum performance
and a more aggressive exhaust note
Product Details:
Eliminate the heavy and restrictive factory catalytic converters with
straight-pipe, high flowing stainless steel downpipes for maximum power
and an exhilarating sound.
FEATURES:
Fits all BMW F12 / F13 M6 vehicles (2012+)
Replaces the restrictive factory catalytic converters with high flowing
200 cell HJS catalystic converters for inceased throttle response, and a
more aggressive exhaust sound
Constructed out of T304L stainless steel with CNC machined flanges and
laser cut brackets
Manufactured entirely in-house by our precision machine shop at Fabspeed
Motorsport
Designed to fit seamlessly with the factory exhaust system and are also
compatible with any other aftermarket exhaust system that is designed to
fit like OEM
Includes two downpipes, labeled left side and right side for easy
installation, and hardware
FS.BMW.F12.PSCDP
$2995
BMW
M2 F87 (2016+)
BMW M2 (F87) Muffler
Bypass Exhaust System
Product Details:
Up the aggression and drop weight while unleashing the visceral tones of
the BMW F87 M2 with Fabspeed's wildly popular Muffler Bypass Exhaust;
now available with multiple tip options!
There are loud exhausts and there are great sounding exhausts. When you
have a loud AND great sounding system... it's pure perfection! The M2
has a great voice to match the power it produces, and we wanted to let
it sing. Our Muffler Bypass Exhaust System deletes the rear muffler,
shedding 14 lbs in the process. This is an exhaust for those who like it
aggressive. Expect an intoxicating and menacing barrage of pops and
crackles upon deceleration. In-cabin tone is very reasonable, though,
and even with our Sport Cat Downpipe installed it still remains a
daily-drivable (and daily-enjoyable) setup.
FEATURES:
Fits all BMW F87 M2 vehicles
Saves 14 lbs from the rear of the vehicle
Will make everyone you know envious of the glorious sound errupting from
your BMW
Constructed from 14-16ga T304L 3"-2.5" stainless steel tubing in house
at Fabspeed Motorsport
Choose between Brushed Single Wall Stainless Steel, Polished Chrome, and
Black Chrome tips
All Fabspeed performance products are backed by the Fabspeed Lifetime
Limited Warranty
NOTE: Installation requires cutting the factory exhaust near a factory
break point. Everything required for installation is included. The
Fabspeed system installs quickly over the factory piping using the
included Torca clamp. Reinstallation of the factory rear muffler (for
our friends with leased vehicles) is quick and easy!
FS.BMW.M2F87.MBEB FS.BMW.M2F87.MBEBR
FS.BMW.M2F87.MBEP
$1195
BMW M2 (F87) Sport Cat Downpipe
Product Details:
Inject new life into your BMW F87 M2 with a perfect high-flow catted
downpipe! Genuine 200-cell HJS catalyst instantly adds power and sport
sound without triggering a check engine light!
FEATURES:
Fits all BMW F87 M2 models
Designed with a 200-cell HJS catalyic converter core for maximum
performance and reliability; same cat core used on our Ferrari 458
Italia applications!
Direct bolt-on replacement; no cutting or welding required
Does not trigger check engine light
Complies with most emissions regulations (NOTE: It the purchaser's
responsibility to verify legality and compliance in their region.)
FS.BMW.M2F87.SCDP
$1195
BMW M2 (F87) Catbypass Downpipe
Product Details:
The ultimate straight-through catless downpipe offering maximum power
and sound from the BMW F87 M2; T304L stainless steel for maximum
performance and durability; not recommended for street use
FEATURES:
Fits all BMW F87 M2 models
Replaces the two restrictive factory catalytic converters with a
free-flowing straight pipe section for maximum exhaust flow
Constructed from CNC mandrel-bent T304L stainless steel for maximum
performance and durability
Direct bolt-on replacement; no cutting or welding required
Recommended for track and off-road use only (NOTE: It the purchaser's
responsibility to verify legality and compliance in their region.)
FS.BMW.M2F87.CBDP
$595
BMW
M235i (2014+)
BMW M235i (F22) Valvetronic
Performance Exhaust System
Product Details:
The ultimate primary catback exhaust system for the Ultimate Driving
Machine includes Fabspeed's high performance Valvetronic rear muffler
and CNC mandrel bent midpipes for the perfect combination of sound and
power.
FEATURES:
Fits BMW F22 M235i vehicles
Includes Deluxe Tips in a Polished Chrome finish
Integrated muffler valve includes machined mounts for the factory
actuators, allowing retention of factory valve functionality
Adds 6 whp and 11 ft/lbs of torque at 3000 RPM
POWER GAINS:
Peak Power
Stock= 309 whp / 328 ft/lbs
Exhaust = 315 whp / 329 ft/lbs
Maximum Gains
3000 RPM = +6whp / +11ft/lbs
FS.BMW.M235.VLVPR FS.BMW.M235.VLVPA
$2595
BMW M235i Resonator Bypass Midpipe
Product Details:
Our Resonator Bypass Midpipe replaces the factory rear pipe and
resonator and unleashes an aggressive sound.
Looking to dial things up to 11? Add our Resonator Bypass Midpipe to
your Fabspeed Muffler Bypass Exhaust System for the loudest, angriest
sounding exhaust setup possible.
FEATURES:
Fits BMW F22 M235i vehicles with OEM Exhaust or Fabspeed Muffler Bypass
Exhaust
Constructed from high-quality 14 gauge C.N.C. mandrel-bent T304L
stainless steel for optimum flow and maximum durability
Designed and built in-house at Fabspeed in our full precision machine
shop
All Fabspeed performance products are backed by the Fabspeed Limited
Lifetime Warranty
FS.BMW.M235.MBECBCKR FS.BMW.M235.MBECBCKA
$595
BMW M235i (F22) HJS Euro 6 Catted
Downpipe
Product Details:
Meet the strictest of emissions standards while freeing up power with an
HJS 300-cell catalyst downpipe.
This downpipe is produced by HJS themselves as a solution to meet the
strict requirements of Euro 6 compliance. As a master distributor of HJS
catalysts, we're happy to import from Germany and supply this downpipe.
Availability and lead time may vary depending on production volume. Call
and speak to one of our performance specialists for details.
FEATURES:
Fits all BMW F22 M235i vehicles
300 cell 2 chamber ECE homologated catalyst cat design improves flow
over factory while being Euro 6 compliant
Direct bolt-on replacement; no cutting or welding required
Does not trigger check engine light
Complies with most emissions regulations, and is Euro 6 certified and
has TÜV homoligation (NOTE: It the purchaser's responsibility to verify
legality and compliance in their region.)
This downpipe replace the original catalytic converters with OE
number:18.32.8.602.882. HJS part number 90 81 2010
NOTE: For clarity, our own 200 cell Sport Cat Downpipe is further
performance oriented.
FS.BMW.M235.HJSDP
$1495
BMW M235i (F22) Sport Cat Downpipe
Product Details:
Inject new life into your M235i with a perfect high-flow catted downpipe!
Genuine 200-cell HJS HD catalyst instantly adds a staggering 21 whp and
36 ft/lbs of torque at 3000 RPM without triggering a check engine light!
NOTES:
Fits all BMW F22 M235i vehicles
Designed with a 200-cell HJS HD catalytic converter core for maximum
performance and reliability; same cat core used on our Ferrari 458
Italia applications!
Direct bolt-on replacement; no cutting or welding required
Does not trigger a check engine light
Complies with most emissions regulations (NOTE: It the purchaser's
responsibility to verify legality and compliance in their region.)
Adds 21 whp and 36 ft/lbs of torque at 3000 RPM
A crease is incorporated to allow for clearance in any M235i setup
M235i Muffler Bypass Exhaust System
installed with carbon fiber tips
Product Details:
Up the aggression and drop weight while unleashing the visceral tones of
the N55 engine
There are loud exhausts, there are great sounding exhausts. When you
have a loud AND great sounding system....M235i OH MY! The N55 has a
great voice to match the power it produces, and we wanted to let it
sing. Our Muffler Bypass Exhaust System deletes the rear muffler,
shedding 14 lbs in the process. This is an exhaust for those who like it
aggressive. Expect an intoxicating and menacing barrage of pops and
crackles upon deceleration. In cabin tone is very reasonable, with our
Sport Cat Downpipe installed we would have no qualms daily driving it at
all.
FEATURES:
Fits all BMW F22 M235i vehicles - with options for fitment with standard
factory rear bumper and for bumpers with the M Performance rear diffuser
Saves 14 lbs from the rear of the vehicle
Will make everyone you know envious of the glorious sound errupting from
your BMW
14-16ga T304L 3"-2.5" stainless steel piping
Includes tips in either 3" Polished Chrome or 3.5" Carbon Fiber
All Fabspeed performance products are backed by the Fabspeed Lifetime
Limited Warranty
NOTE: Installation requires cutting the factory exhaust near a factory
break point. Everything required for installation is included. The
Fabspeed system installs quickly over the factory piping using the
included Torca clamp. Reinstallation of the factory rear muffler (for
our friends with leased vehicles) is quick and easy!
FS.BMW.M235.MBECBRP
Sale Price Starts at $895
BMW M235i (F22) Catbypass Downpipe
Product Details:
The ultimate catless downpipe offering maximum power and sound; adds 24
whp and 43 ft/lbs of torque at 3000 RPM; not recommended for street use
FEATURES:
Fits all BMW F22 M235i vehicles
Replaces the two restrictive factory catalytic converters with a
free-flowing straight pipe section for maximum exhaust flow
Direct bolt-on replacement; no cutting or welding required
Recommended for track and off-road use only (NOTE: It the purchaser's
responsibility to verify legality and compliance in their region.)
Adds 24 whp and 43 ft/lbs of torque at 3000 RPM
POWER GAINS:
Straight-through tubing section replaces
the heavy and restrictive OEM catalytic converters for maximum power and
sound; recommended for track/off-road use only.
-Fits all BMW 335/135i vehicles (2006-2011)
-Improves power by 32 whp and 39 ft-lbs of torque
-Straight-through design allows for maximum power and sound
-Constructed from mirror-polished T304L stainless steel
-Direct bolt-on replacement for OEM primary catalytic converters
-All Fabspeed performance products are backed by the Fabspeed Lifetime
Limited Warranty
FS.BMW.N54.CBDP
$695
BMW 335/135i COBB Front Mount
Intercooler
Product Details:
High performance intercooler upgrade engineered for optimum flow
efficiency lowers intake temperature and improves flow for maximum power
gains.
The COBB Front Mount Intercooler is a direct replacement improvement and
the easiest modification to make for a drastic increase in cooling and
power. Includes everything needed to install and requires no bumper
modifications. While this intercooler alone will make sustainable power
gains through lowering IAT's, it's perfect when paired with COBB's
Accessport to unlock even more power.
FEATURES:
Efficient Bar and Plate Design
60% Greater Core Volume
Unique Stepped Design to Increase Frontal Surface Area
Cast Aluminum End Tanks
Easy Installation, No Modification Required
Factory-like fitment for the 2007-2011 3-Series sedan, 2008-13 3-Series
Coupe, and 2008+ 1-Series.
Increase power even more when paired with a COBB Accessport Tuner,
specifically created Stage 1+ or Stage 2+ map for your driving style.
Manufacturer Product Code: 7B1500
Fitment has not been confirmed on DCT transmission vehicles.
FS.BMW.N54.COBBIC
$995
BMW 335/135i COBB Tuning Accessport V3
Product Details:
The Accessport V3 is the world's best selling, most flexible ECU upgrade
solution for BMW. Unlock power hidden within the vehicle by replacing
conservative factory settings with more aggressive calibrations. Upgrade
forever with off-the-shelf (OTS) calibrations for most bolt-on
modifications. The new in-cabin mountable Accessport V3 has a large,
full color, higher resolution screen which allows you to monitor up to
six parameters in real time. Fully customizable from the look (multiple
bezel colors), layout (set up a race, street or dyno gauge cluster) and
mounting options (choose from 1,000s of standard vehicle mounts). Of
course, all of the great COBB tuning is included - with enough space for
100 calibrations.
FEATURES
-Simple Installation / Uninstall: Everything is included for the simple
installation! Intuitive on-screen instructions identify your exact
vehicle and available maps. Revert your ECU to exactly as it was before
with the easy to use Uninstall option from the main menu.
-Trouble Codes: Read engine trouble codes to diagnose issues. Clear them
when resolved. Prevent expensive trips to the dealership.
-Gauges: Use your Accessport as a gauge to monitor boost or any other
live information, directly from the ECU.
-Data Logging: Record multiple data channels simultaneously for in-depth
evaluation of engine performance. Stores up to 10 hours
-Performance Measuring: Welcome to your own performance evaluation
suite! Measure 0-60 mph time, 60 foot and ¼ mile ET’s. and Trap Speed.
-Shift Light: Set custom RPM warning lights for perfect shifts every
time.
-AP Manager: Use your PC or Mac to manage maps, download recorded
datalogs, or quickly update your Accessport.
MAPS
Stage 1
-Modification Requirements: Stock or catback exhaust only / stock intake
or drop in filter
-Aggressive (91-92 Octane) - Boost Targets: 16psi peak tapering down to
11psi by redline +/- 1.5psi
Manual: +30% HP / +38% lb ft over stock
AM: +24% HP / +35% lb ft over stock
-Sport (93 Octane) - Boost Targets: 11psi peak tapering down to 9.5psi
by redline +/- 1.5psi
Manual: +26% HP / +33% lb ft over stock
AM: +20% HP / +30% lb ft over stock
Stage 2
-Modification Requirements: High flow aftermarket downpipe(s) REQUIRED,
stock or catback exhaust only / stock intake or drop in filter
-Aggressive (91-92 Octane) - Boost Targets: 16psi peak tapering down to
11psi by redline +/- 1.5psi
Manual: +30% HP / +38% lb ft over stock
AM: +24% HP / +35% lb ft over stock
-Sport (93 Octane) - Boost Targets: 11psi peak tapering down to 9.5psi
by redline +/- 1.5psi
Manual: +26% HP / +33% lb ft over stock
AM: +20% HP / +30% lb ft over stock
Stage 0
Stock calibration. Factory map that the car was delivered from BMW with.
Does not uninstall Accessport.
Note - Please contact us if you are outside of the United States to
verify compatability with your country's ECU version before ordering.
FS.BMW.N54.COBBAP FS.BMW.N55.COBBAP